From: Will Deacon <will.deacon@xxxxxxx>
[ Upstream commit b63b3439b85609338e4faabd5d2588dbda137e5c ]
If we find that the SMMU is enabled during probe, we reset it by
re-initialising its registers and either enabling translation or placing
it into bypass based on the disable_bypass commandline option.
In the case of a kdump kernel, the SMMU won't have been shutdown cleanly
by the previous kernel and there may be concurrent DMA through the SMMU.
Rather than reset the SMMU to bypass, which would likely lead to rampant
data corruption, we can instead configure the SMMU to abort all incoming
transactions when we find that it is enabled from within a kdump kernel.
Reported-by: Sameer Goel <sgoel@xxxxxxxxxxxxxx>
Signed-off-by: Will Deacon <will.deacon@xxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
drivers/iommu/arm-smmu-v3.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 1d647104bccc..b73c6a7bf7f2 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -24,6 +24,7 @@
#include <linux/acpi_iort.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
+#include <linux/crash_dump.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
#include <linux/err.h>
@@ -2211,8 +2212,12 @@ static int arm_smmu_update_gbpa(struct arm_smmu_device *smmu, u32 set, u32 clr)
reg &= ~clr;
reg |= set;
writel_relaxed(reg | GBPA_UPDATE, gbpa);
- return readl_relaxed_poll_timeout(gbpa, reg, !(reg & GBPA_UPDATE),
- 1, ARM_SMMU_POLL_TIMEOUT_US);
+ ret = readl_relaxed_poll_timeout(gbpa, reg, !(reg & GBPA_UPDATE),
+ 1, ARM_SMMU_POLL_TIMEOUT_US);
+
+ if (ret)
+ dev_err(smmu->dev, "GBPA not responding to update\n");
+ return ret;
}
static void arm_smmu_free_msis(void *data)
@@ -2392,8 +2397,15 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
/* Clear CR0 and sync (disables SMMU and queue processing) */
reg = readl_relaxed(smmu->base + ARM_SMMU_CR0);
- if (reg & CR0_SMMUEN)
+ if (reg & CR0_SMMUEN) {
+ if (is_kdump_kernel()) {
+ arm_smmu_update_gbpa(smmu, GBPA_ABORT, 0);
+ arm_smmu_device_disable(smmu);
+ return -EBUSY;
+ }
+
dev_warn(smmu->dev, "SMMU currently enabled! Resetting...\n");
+ }
ret = arm_smmu_device_disable(smmu);
if (ret)
@@ -2491,10 +2503,8 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
enables |= CR0_SMMUEN;
} else {
ret = arm_smmu_update_gbpa(smmu, 0, GBPA_ABORT);
- if (ret) {
- dev_err(smmu->dev, "GBPA not responding to update\n");
+ if (ret)
return ret;
- }
}
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
ARM_SMMU_CR0ACK);
--
2.17.1
