Re: reboot on wandboard fails with v4.14.67 (bisected to 2059e527a6)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rasmus,

On Wed, Aug 29, 2018 at 10:57 AM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
> Hi Rasmus,
>
>> On 2018-08-29 11:55, Rasmus Villemoes wrote:
>>> We're using imx_v6_v7_defconfig on our Wandboards. After upgrading to
>>> v4.14.67, reboot no longer works (or, well, takes a very long time when
>>> the watchdog is configured).
>>>
>>> v4.14.66 works fine, the breakage bisects to
>>> 2059e527a659cf16d6bb709f1c8509f7a7623fc4 (ARM: imx_v6_v7_defconfig:
>>> Select ULPI support), and reverting that on top of v4.14.67 again works.
>>
>> FWIW, v4.18 (the mainline release containing the upstream commit
>> 157bcc0609) works fine, while v4.17.19 which also has that commit
>> backported (as df06ca1f56) fails. So I'm guessing there must be some
>> other commits in v4.18 that happen to make imx_v6_v7_defconfig work.
>
> Thanks for reporting.
>
> Commit 157bcc06094c3 ("ARM: imx_v6_v7_defconfig: Select ULPI support")
> was meant to be applied for 4.18 only.
>
> I think we should revert it from earlier stable versions.

Or a better solution would be to port
a930d8bd94d8db7715d1af74299f710b1fb22fc8 from upstream.

Please test the attached patch adjusted for 4.14.67.

Thanks
From 475a0301116c4853e4b37abf081ed25d6706c79e Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@xxxxxxx>
Date: Wed, 29 Aug 2018 17:13:33 -0300
Subject: [PATCH] usb: chipidea: Always build ULPI code

[commit a930d8bd94d8db7715d1af74299f710b1fb22fc8 upstream]

Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel
hang on imx51 systems that use the ULPI interface and do not select the
CONFIG_USB_CHIPIDEA_ULPI option.

In order to avoid such potential misuse, let's always build the
chipidea ULPI code into the final ci_hdrc object.

Tested on a imx51-babbage board.

Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51")
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
---
 drivers/usb/chipidea/Kconfig  | 9 +--------
 drivers/usb/chipidea/Makefile | 3 +--
 drivers/usb/chipidea/ci.h     | 8 --------
 drivers/usb/chipidea/ulpi.c   | 3 +++
 4 files changed, 5 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 51f4157..6d990e4 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -3,6 +3,7 @@ config USB_CHIPIDEA
 	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
 	select EXTCON
 	select RESET_CONTROLLER
+	select USB_ULPI_BUS
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on ChipIdea silicon IP. It supports:
@@ -38,12 +39,4 @@ config USB_CHIPIDEA_HOST
 	help
 	  Say Y here to enable host controller functionality of the
 	  ChipIdea driver.
-
-config USB_CHIPIDEA_ULPI
-	bool "ChipIdea ULPI PHY support"
-	depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_CHIPIDEA
-	help
-	  Say Y here if you have a ULPI PHY attached to your ChipIdea
-	  controller.
-
 endif
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index e3d5e72..12df94f 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_USB_CHIPIDEA)		+= ci_hdrc.o
 
-ci_hdrc-y				:= core.o otg.o debug.o
+ci_hdrc-y				:= core.o otg.o debug.o ulpi.o
 ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC)	+= udc.o
 ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST)	+= host.o
 ci_hdrc-$(CONFIG_USB_OTG_FSM)		+= otg_fsm.o
-ci_hdrc-$(CONFIG_USB_CHIPIDEA_ULPI)	+= ulpi.o
 
 # Glue/Bridge layers go here
 
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 6743f85..61aee2b 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -243,10 +243,8 @@ struct ci_hdrc {
 
 	struct ci_hdrc_platform_data	*platdata;
 	int				vbus_active;
-#ifdef CONFIG_USB_CHIPIDEA_ULPI
 	struct ulpi			*ulpi;
 	struct ulpi_ops 		ulpi_ops;
-#endif
 	struct phy			*phy;
 	/* old usb_phy interface */
 	struct usb_phy			*usb_phy;
@@ -429,15 +427,9 @@ static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci)
 #endif
 }
 
-#if IS_ENABLED(CONFIG_USB_CHIPIDEA_ULPI)
 int ci_ulpi_init(struct ci_hdrc *ci);
 void ci_ulpi_exit(struct ci_hdrc *ci);
 int ci_ulpi_resume(struct ci_hdrc *ci);
-#else
-static inline int ci_ulpi_init(struct ci_hdrc *ci) { return 0; }
-static inline void ci_ulpi_exit(struct ci_hdrc *ci) { }
-static inline int ci_ulpi_resume(struct ci_hdrc *ci) { return 0; }
-#endif
 
 u32 hw_read_intr_enable(struct ci_hdrc *ci);
 
diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c
index 1219583..f652132 100644
--- a/drivers/usb/chipidea/ulpi.c
+++ b/drivers/usb/chipidea/ulpi.c
@@ -103,6 +103,9 @@ int ci_ulpi_resume(struct ci_hdrc *ci)
 {
 	int cnt = 100000;
 
+	if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI)
+		return 0;
+
 	while (cnt-- > 0) {
 		if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE))
 			return 0;
-- 
2.7.4


[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux