On Fri, 10 Aug 2018 at 22:11, Greg KH <greg@xxxxxxxxx> wrote: > > On Wed, Aug 08, 2018 at 06:15:53PM +0800, Yongqin Liu wrote: > > On Wed, 8 Aug 2018 at 16:44, Greg KH <greg@xxxxxxxxx> wrote: > > > > > > On Wed, Aug 08, 2018 at 04:19:10PM +0800, Yongqin Liu wrote: > > > > Hi, All > > > > Sorry, I am following the instructions in > > > > Documentation/networking/netdev-FAQ.txt to send out this mail, > > > > if I was wrong or there are more things I need to do, please let me know. > > > > > > > > After investigated on some failures of the android VtsKernelNetTest module test, > > > > I found that without the change of "ipv4+ipv6: Make INET*_ESP select > > > > CRYPTO_ECHAINIV", > > > > the config of CRYPTO_ECHAINIV will be generated as m by default in the > > > > .config file, > > > > which needs more module loading process to be done. > > > > But with the 4.9 and 4.14 kernels which have the change, > > > > CRYPTO_ECHAINIV will be generated as y by default in the .config file. > > > > > > > > We could set config of CRYPTO_ECHAINIV to y explicitly to generated > > > > the correct .config file, > > > > > > That would be the easiest solution here, right? Why can you not do > > > that? > > > > > > but having the change of "ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIV" > > > > cherry picked into the 4.4 stable kernel looks more like the right solution. > > > > > > > > The commit id for that change is 32b6170ca59ccf07d0e394561e54b2cd9726038c, > > > > it's already in 4.9 and 4.14 kernels, like here: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/?h=linux-4.9.y&id=32b6170ca59ccf07d0e394561e54b2cd9726038c > > > > > > Yes, because it showed up in 4.5 :) > > > > > > Shouldn't your device configurations for 4.4 already be long done? You > > > had better not be working on new systems with a 4.4 kernel, otherwise > > > you are in big trouble for many other reasons. So your configuration > > > should already be finished so I fail to see how backporting this is > > > really going to solve anyone's problems. > > > > Hmm, the background is that we did android VtsKernelNetTest test > > across different kernels, > > and found that the same tests failed with 4.4 kernel. > > With setting CRYPTO_ECHAINIV to y explicitly for specific platform, > > or applying this change to specific kernel, like the kernel for HiKey platform, > > that would only help to fix the problem for HiKey platform. > > If there are any other platforms that use 4.4 kernel, they might have > > the same problem, > > and they will need to do the same thing again separately to have that > > problem resolved. > > but if we have the change applied into the 4.4 stable kernel, > > all platforms that based on 4.4 kernel would have this problem fixed > > after they updated to the latest 4.4 stable kernel, > > that is why we want to have this change applied into the 4.4 stable kernel. > > Ok, that's reasonable, now queued up. > > greg k-h Thanks for the help! -- Best Regards, Yongqin Liu --------------------------------------------------------------- #mailing list linaro-android@xxxxxxxxxxxxxxxx http://lists.linaro.org/mailman/listinfo/linaro-android
