4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Florian Fainelli <f.fainelli@xxxxxxxxx> [ Upstream commit 9e3bff923913729d76d87f0015848ee7b8ff7083 ] SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit is not set by default. Fix the logic such that we properly check whether that bit is set or not and we don't forward an extra 4 bytes to the network stack. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++-- drivers/net/ethernet/broadcom/bcmsysport.h | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1851,8 +1851,8 @@ static int bcm_sysport_open(struct net_d if (!priv->is_lite) priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD); else - priv->crc_fwd = !!(gib_readl(priv, GIB_CONTROL) & - GIB_FCS_STRIP); + priv->crc_fwd = !((gib_readl(priv, GIB_CONTROL) & + GIB_FCS_STRIP) >> GIB_FCS_STRIP_SHIFT); phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link, 0, priv->phy_interface); --- a/drivers/net/ethernet/broadcom/bcmsysport.h +++ b/drivers/net/ethernet/broadcom/bcmsysport.h @@ -277,7 +277,8 @@ struct bcm_rsb { #define GIB_GTX_CLK_EXT_CLK (0 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_125MHZ (1 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_250MHZ (2 << GIB_GTX_CLK_SEL_SHIFT) -#define GIB_FCS_STRIP (1 << 6) +#define GIB_FCS_STRIP_SHIFT 6 +#define GIB_FCS_STRIP (1 << GIB_FCS_STRIP_SHIFT) #define GIB_LCL_LOOP_EN (1 << 7) #define GIB_LCL_LOOP_TXEN (1 << 8) #define GIB_RMT_LOOP_EN (1 << 9)