[PATCH 4.4 23/31] net/mlx5: Fix command interface race in polling mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Vesker <valex@xxxxxxxxxxxx>

[ Upstream commit d412c31dae053bf30a1bc15582a9990df297a660 ]

The command interface can work in two modes: Events and Polling.
In the general case, each time we invoke a command, a work is
queued to handle it.

When working in events, the interrupt handler completes the
command execution. On the other hand, when working in polling
mode, the work itself completes it.

Due to a bug in the work handler, a command could have been
completed by the interrupt handler, while the work handler
hasn't finished yet, causing the it to complete once again
if the command interface mode was changed from Events to
polling after the interrupt handler was called.

mlx5_unload_one()
        mlx5_stop_eqs()
                // Destroy the EQ before cmd EQ
                ...cmd_work_handler()
                        write_doorbell()
                        --> EVENT_TYPE_CMD
                                mlx5_cmd_comp_handler() // First free
                                        free_ent(cmd, ent->idx)
                                        complete(&ent->done)

        <-- mlx5_stop_eqs //cmd was complete
                // move to polling before destroying the last cmd EQ
                mlx5_cmd_use_polling()
                        cmd->mode = POLL;

                --> cmd_work_handler (continues)
                        if (cmd->mode == POLL)
                                mlx5_cmd_comp_handler() // Double free

The solution is to store the cmd->mode before writing the doorbell.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Alex Vesker <valex@xxxxxxxxxxxx>
Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -643,6 +643,7 @@ static void cmd_work_handler(struct work
 	struct semaphore *sem;
 	unsigned long flags;
 	int alloc_ret;
+	int cmd_mode;
 
 	sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
 	down(sem);
@@ -688,6 +689,7 @@ static void cmd_work_handler(struct work
 	set_signature(ent, !cmd->checksum_disabled);
 	dump_command(dev, ent, 1);
 	ent->ts1 = ktime_get_ns();
+	cmd_mode = cmd->mode;
 
 	/* ring doorbell after the descriptor is valid */
 	mlx5_core_dbg(dev, "writing 0x%x to command doorbell\n", 1 << ent->idx);
@@ -695,7 +697,7 @@ static void cmd_work_handler(struct work
 	iowrite32be(1 << ent->idx, &dev->iseg->cmd_dbell);
 	mmiowb();
 	/* if not in polling don't use ent after this point */
-	if (cmd->mode == CMD_MODE_POLLING) {
+	if (cmd_mode == CMD_MODE_POLLING) {
 		poll_timeout(ent);
 		/* make sure we read the descriptor after ownership is SW */
 		rmb();





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux