4.17-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vignesh R <vigneshr@xxxxxx>
commit aa7eee8a143a7e8b530eb1e75fb86cae793d1e21 upstream.
Sometimes when writing large size files to flash in direct/memory mapped
mode, it is seen that flash write enable command times out with error:
[ 503.146293] cadence-qspi 47040000.ospi: Flash command execution timed out.
This is because, we need to make sure previous direct write operation
is complete by polling for IDLE bit in CONFIG_REG before starting the
next operation.
Fix this by polling for IDLE bit after memory mapped write.
Fixes: a27f2eaf2b27 ("mtd: spi-nor: cadence-quadspi: Add support for direct access mode")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Vignesh R <vigneshr@xxxxxx>
Reviewed-by: Marek Vasut <marek.vasut@xxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mtd/spi-nor/cadence-quadspi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -920,10 +920,12 @@ static ssize_t cqspi_write(struct spi_no
if (ret)
return ret;
- if (f_pdata->use_direct_mode)
+ if (f_pdata->use_direct_mode) {
memcpy_toio(cqspi->ahb_base + to, buf, len);
- else
+ ret = cqspi_wait_idle(cqspi);
+ } else {
ret = cqspi_indirect_write_execute(nor, to, buf, len);
+ }
if (ret)
return ret;
