4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal <damien.lemoal@xxxxxxx>
commit 6edf1d4cb0acde3a0a5dac849f33031bd7abb7b1 upstream.
If the ALL bit is set in the ZBC_OUT command, the command zone ID field
(block) should be ignored.
Reported-by: David Butterfield <david.butterfield@xxxxxxx>
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-scsi.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3801,7 +3801,14 @@ static unsigned int ata_scsi_zbc_out_xla
*/
goto invalid_param_len;
}
- if (block >= dev->n_sectors) {
+
+ all = cdb[14] & 0x1;
+ if (all) {
+ /*
+ * Ignore the block address (zone ID) as defined by ZBC.
+ */
+ block = 0;
+ } else if (block >= dev->n_sectors) {
/*
* Block must be a valid zone ID (a zone start LBA).
*/
@@ -3809,8 +3816,6 @@ static unsigned int ata_scsi_zbc_out_xla
goto invalid_fld;
}
- all = cdb[14] & 0x1;
-
if (ata_ncq_enabled(qc->dev) &&
ata_fpdma_zac_mgmt_out_supported(qc->dev)) {
tf->protocol = ATA_PROT_NCQ_NODATA;
