3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brad Love <brad@xxxxxxxxxxxxxxxx>
commit 3ee9bc12342cf546313d300808ff47d7dbb8e7db upstream.
The cx25840 driver currently configures 885, 887, and 888 using
default divisors for each chip. This check to see if the cx23885
driver has passed the cx25840 a non-default clock rate for a
specific chip. If a cx23885 board has left clk_freq at 0, the
clock default values will be used to configure the PLLs.
This patch only has effect on 888 boards who set clk_freq to 25M.
Signed-off-by: Brad Love <brad@xxxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
Cc: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/i2c/cx25840/cx25840-core.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -467,8 +467,13 @@ static void cx23885_initialize(struct i2
{
DEFINE_WAIT(wait);
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+ u32 clk_freq = 0;
struct workqueue_struct *q;
+ /* cx23885 sets hostdata to clk_freq pointer */
+ if (v4l2_get_subdev_hostdata(&state->sd))
+ clk_freq = *((u32 *)v4l2_get_subdev_hostdata(&state->sd));
+
/*
* Come out of digital power down
* The CX23888, at least, needs this, otherwise registers aside from
@@ -504,8 +509,13 @@ static void cx23885_initialize(struct i2
* 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz
* 572.73 MHz before post divide
*/
- /* HVR1850 or 50MHz xtal */
- cx25840_write(client, 0x2, 0x71);
+ if (clk_freq == 25000000) {
+ /* 888/ImpactVCBe or 25Mhz xtal */
+ ; /* nothing to do */
+ } else {
+ /* HVR1850 or 50MHz xtal */
+ cx25840_write(client, 0x2, 0x71);
+ }
cx25840_write4(client, 0x11c, 0x01d1744c);
cx25840_write4(client, 0x118, 0x00000416);
cx25840_write4(client, 0x404, 0x0010253e);
@@ -548,9 +558,15 @@ static void cx23885_initialize(struct i2
/* HVR1850 */
switch (state->id) {
case CX23888_AV:
- /* 888/HVR1250 specific */
- cx25840_write4(client, 0x10c, 0x13333333);
- cx25840_write4(client, 0x108, 0x00000515);
+ if (clk_freq == 25000000) {
+ /* 888/ImpactVCBe or 25MHz xtal */
+ cx25840_write4(client, 0x10c, 0x01b6db7b);
+ cx25840_write4(client, 0x108, 0x00000512);
+ } else {
+ /* 888/HVR1250 or 50MHz xtal */
+ cx25840_write4(client, 0x10c, 0x13333333);
+ cx25840_write4(client, 0x108, 0x00000515);
+ }
break;
default:
cx25840_write4(client, 0x10c, 0x002be2c9);
@@ -577,7 +593,7 @@ static void cx23885_initialize(struct i2
* 368.64 MHz before post divide
* 122.88 MHz / 0xa = 12.288 MHz
*/
- /* HVR1850 or 50MHz xtal */
+ /* HVR1850 or 50MHz xtal or 25MHz xtal */
cx25840_write4(client, 0x114, 0x017dbf48);
cx25840_write4(client, 0x110, 0x000a030e);
break;
