From: Andy Lutomirski <luto@xxxxxxxxxx> commit c592b57347069abfc0dcad3b3a302cf882602597 upstream This removes all the obvious code paths that depend on lazy FPU mode. It shouldn't change the generated code at all. Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxx> Signed-off-by: Rik van Riel <riel@xxxxxxxxxx> Cc: Borislav Petkov <bp@xxxxxxxxx> Cc: Brian Gerst <brgerst@xxxxxxxxx> Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx> Cc: Denys Vlasenko <dvlasenk@xxxxxxxxxx> Cc: Fenghua Yu <fenghua.yu@xxxxxxxxx> Cc: H. Peter Anvin <hpa@xxxxxxxxx> Cc: Josh Poimboeuf <jpoimboe@xxxxxxxxxx> Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Cc: Oleg Nesterov <oleg@xxxxxxxxxx> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx> Cc: Quentin Casasnovas <quentin.casasnovas@xxxxxxxxxx> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Cc: pbonzini@xxxxxxxxxx Link: http://lkml.kernel.org/r/1475627678-20788-5-git-send-email-riel@xxxxxxxxxx Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx> Signed-off-by: Daniel Sangorrin <daniel.sangorrin@xxxxxxxxxxxxx> --- I backported this patch to remove the final fpu lazy mode deadcode from stable 4.9.y. I only had to solve a small conflict caused by the fact that commit b22cbe404a9c ("x86/fpu: Fix invalid FPU ptrace state after execve()") had been applied before in stable (it was supposed to come after) After applying this patch please do the following to remove more deadcode: - cherry-pick: 3913cc350757 ("x86/fpu: Remove struct fpu::counter") - revert: f09a7b0eead7 ("perf: sync up x86/.../cpufeatures.h") - cherry-pick: e63650840e8b ("x86/fpu: Finish excising 'eagerfpu'") arch/x86/crypto/crc32c-intel_glue.c | 17 ++++------------- arch/x86/include/asm/fpu/internal.h | 34 +--------------------------------- arch/x86/kernel/fpu/core.c | 36 ++++-------------------------------- arch/x86/kernel/fpu/signal.c | 8 +++----- arch/x86/kernel/fpu/xstate.c | 9 --------- arch/x86/kvm/cpuid.c | 4 +--- arch/x86/kvm/x86.c | 10 ---------- 7 files changed, 13 insertions(+), 105 deletions(-) diff --git a/arch/x86/crypto/crc32c-intel_glue.c b/arch/x86/crypto/crc32c-intel_glue.c index dd19584..5773e11 100644 --- a/arch/x86/crypto/crc32c-intel_glue.c +++ b/arch/x86/crypto/crc32c-intel_glue.c @@ -48,21 +48,13 @@ #ifdef CONFIG_X86_64 /* * use carryless multiply version of crc32c when buffer - * size is >= 512 (when eager fpu is enabled) or - * >= 1024 (when eager fpu is disabled) to account + * size is >= 512 to account * for fpu state save/restore overhead. */ -#define CRC32C_PCL_BREAKEVEN_EAGERFPU 512 -#define CRC32C_PCL_BREAKEVEN_NOEAGERFPU 1024 +#define CRC32C_PCL_BREAKEVEN 512 asmlinkage unsigned int crc_pcl(const u8 *buffer, int len, unsigned int crc_init); -static int crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_EAGERFPU; -#define set_pcl_breakeven_point() \ -do { \ - if (!use_eager_fpu()) \ - crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_NOEAGERFPU; \ -} while (0) #endif /* CONFIG_X86_64 */ static u32 crc32c_intel_le_hw_byte(u32 crc, unsigned char const *data, size_t length) @@ -185,7 +177,7 @@ static int crc32c_pcl_intel_update(struct shash_desc *desc, const u8 *data, * use faster PCL version if datasize is large enough to * overcome kernel fpu state save/restore overhead */ - if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) { + if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) { kernel_fpu_begin(); *crcp = crc_pcl(data, len, *crcp); kernel_fpu_end(); @@ -197,7 +189,7 @@ static int crc32c_pcl_intel_update(struct shash_desc *desc, const u8 *data, static int __crc32c_pcl_intel_finup(u32 *crcp, const u8 *data, unsigned int len, u8 *out) { - if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) { + if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) { kernel_fpu_begin(); *(__le32 *)out = ~cpu_to_le32(crc_pcl(data, len, *crcp)); kernel_fpu_end(); @@ -257,7 +249,6 @@ static int __init crc32c_intel_mod_init(void) alg.update = crc32c_pcl_intel_update; alg.finup = crc32c_pcl_intel_finup; alg.digest = crc32c_pcl_intel_digest; - set_pcl_breakeven_point(); } #endif return crypto_register_shash(&alg); diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h index 8852e3a..7801d32 100644 --- a/arch/x86/include/asm/fpu/internal.h +++ b/arch/x86/include/asm/fpu/internal.h @@ -60,11 +60,6 @@ extern u64 fpu__get_supported_xfeatures_mask(void); /* * FPU related CPU feature flag helper routines: */ -static __always_inline __pure bool use_eager_fpu(void) -{ - return true; -} - static __always_inline __pure bool use_xsaveopt(void) { return static_cpu_has(X86_FEATURE_XSAVEOPT); @@ -501,24 +496,6 @@ static inline int fpu_want_lazy_restore(struct fpu *fpu, unsigned int cpu) } -/* - * Wrap lazy FPU TS handling in a 'hw fpregs activation/deactivation' - * idiom, which is then paired with the sw-flag (fpregs_active) later on: - */ - -static inline void __fpregs_activate_hw(void) -{ - if (!use_eager_fpu()) - clts(); -} - -static inline void __fpregs_deactivate_hw(void) -{ - if (!use_eager_fpu()) - stts(); -} - -/* Must be paired with an 'stts' (fpregs_deactivate_hw()) after! */ static inline void __fpregs_deactivate(struct fpu *fpu) { WARN_ON_FPU(!fpu->fpregs_active); @@ -528,7 +505,6 @@ static inline void __fpregs_deactivate(struct fpu *fpu) trace_x86_fpu_regs_deactivated(fpu); } -/* Must be paired with a 'clts' (fpregs_activate_hw()) before! */ static inline void __fpregs_activate(struct fpu *fpu) { WARN_ON_FPU(fpu->fpregs_active); @@ -554,22 +530,17 @@ static inline int fpregs_active(void) } /* - * Encapsulate the CR0.TS handling together with the - * software flag. - * * These generally need preemption protection to work, * do try to avoid using these on their own. */ static inline void fpregs_activate(struct fpu *fpu) { - __fpregs_activate_hw(); __fpregs_activate(fpu); } static inline void fpregs_deactivate(struct fpu *fpu) { __fpregs_deactivate(fpu); - __fpregs_deactivate_hw(); } /* @@ -596,8 +567,7 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu) * or if the past 5 consecutive context-switches used math. */ fpu.preload = static_cpu_has(X86_FEATURE_FPU) && - new_fpu->fpstate_active && - (use_eager_fpu() || new_fpu->counter > 5); + new_fpu->fpstate_active; if (old_fpu->fpregs_active) { if (!copy_fpregs_to_fpstate(old_fpu)) @@ -615,8 +585,6 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu) __fpregs_activate(new_fpu); trace_x86_fpu_regs_activated(new_fpu); prefetch(&new_fpu->state); - } else { - __fpregs_deactivate_hw(); } } else { old_fpu->counter = 0; diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c index 96d80df..2dc1927 100644 --- a/arch/x86/kernel/fpu/core.c +++ b/arch/x86/kernel/fpu/core.c @@ -58,27 +58,9 @@ static bool kernel_fpu_disabled(void) return this_cpu_read(in_kernel_fpu); } -/* - * Were we in an interrupt that interrupted kernel mode? - * - * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that - * pair does nothing at all: the thread must not have fpu (so - * that we don't try to save the FPU state), and TS must - * be set (so that the clts/stts pair does nothing that is - * visible in the interrupted kernel thread). - * - * Except for the eagerfpu case when we return true; in the likely case - * the thread has FPU but we are not going to set/clear TS. - */ static bool interrupted_kernel_fpu_idle(void) { - if (kernel_fpu_disabled()) - return false; - - if (use_eager_fpu()) - return true; - - return !current->thread.fpu.fpregs_active && (read_cr0() & X86_CR0_TS); + return !kernel_fpu_disabled(); } /* @@ -126,7 +108,6 @@ void __kernel_fpu_begin(void) copy_fpregs_to_fpstate(fpu); } else { this_cpu_write(fpu_fpregs_owner_ctx, NULL); - __fpregs_activate_hw(); } } EXPORT_SYMBOL(__kernel_fpu_begin); @@ -137,8 +118,6 @@ void __kernel_fpu_end(void) if (fpu->fpregs_active) copy_kernel_to_fpregs(&fpu->state); - else - __fpregs_deactivate_hw(); kernel_fpu_enable(); } @@ -200,10 +179,7 @@ void fpu__save(struct fpu *fpu) trace_x86_fpu_before_save(fpu); if (fpu->fpregs_active) { if (!copy_fpregs_to_fpstate(fpu)) { - if (use_eager_fpu()) - copy_kernel_to_fpregs(&fpu->state); - else - fpregs_deactivate(fpu); + copy_kernel_to_fpregs(&fpu->state); } } trace_x86_fpu_after_save(fpu); @@ -261,8 +237,7 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu) * Don't let 'init optimized' areas of the XSAVE area * leak into the child task: */ - if (use_eager_fpu()) - memset(&dst_fpu->state.xsave, 0, fpu_kernel_xstate_size); + memset(&dst_fpu->state.xsave, 0, fpu_kernel_xstate_size); /* * Save current FPU registers directly into the child @@ -284,10 +259,7 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu) memcpy(&src_fpu->state, &dst_fpu->state, fpu_kernel_xstate_size); - if (use_eager_fpu()) - copy_kernel_to_fpregs(&src_fpu->state); - else - fpregs_deactivate(src_fpu); + copy_kernel_to_fpregs(&src_fpu->state); } preempt_enable(); diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c index 3ec0d2d..3a93186 100644 --- a/arch/x86/kernel/fpu/signal.c +++ b/arch/x86/kernel/fpu/signal.c @@ -344,11 +344,9 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size) } fpu->fpstate_active = 1; - if (use_eager_fpu()) { - preempt_disable(); - fpu__restore(fpu); - preempt_enable(); - } + preempt_disable(); + fpu__restore(fpu); + preempt_enable(); return err; } else { diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index abfbb61b..e9d7f46 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c @@ -890,15 +890,6 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey, */ if (!boot_cpu_has(X86_FEATURE_OSPKE)) return -EINVAL; - /* - * For most XSAVE components, this would be an arduous task: - * brining fpstate up to date with fpregs, updating fpstate, - * then re-populating fpregs. But, for components that are - * never lazily managed, we can just access the fpregs - * directly. PKRU is never managed lazily, so we can just - * manipulate it directly. Make sure it stays that way. - */ - WARN_ON_ONCE(!use_eager_fpu()); /* Set the bits we need in PKRU: */ if (init_val & PKEY_DISABLE_ACCESS) diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 7e5119c..c17d389 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -16,7 +16,6 @@ #include <linux/export.h> #include <linux/vmalloc.h> #include <linux/uaccess.h> -#include <asm/fpu/internal.h> /* For use_eager_fpu. Ugh! */ #include <asm/user.h> #include <asm/fpu/xstate.h> #include "cpuid.h" @@ -114,8 +113,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu) if (best && (best->eax & (F(XSAVES) | F(XSAVEC)))) best->ebx = xstate_required_size(vcpu->arch.xcr0, true); - if (use_eager_fpu()) - kvm_x86_ops->fpu_activate(vcpu); + kvm_x86_ops->fpu_activate(vcpu); /* * The existing code assumes virtual address is 48-bit in the canonical diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5ca23af..0754dae 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7513,16 +7513,6 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) copy_fpregs_to_fpstate(&vcpu->arch.guest_fpu); __kernel_fpu_end(); ++vcpu->stat.fpu_reload; - /* - * If using eager FPU mode, or if the guest is a frequent user - * of the FPU, just leave the FPU active for next time. - * Every 255 times fpu_counter rolls over to 0; a guest that uses - * the FPU in bursts will revert to loading it on demand. - */ - if (!use_eager_fpu()) { - if (++vcpu->fpu_counter < 5) - kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); - } trace_kvm_fpu(0); } -- 2.1.4
