Modern NAND controller drivers implement ->exec_op() instead of
->cmdfunc(), make sure we don't end up with a NULL pointer dereference
when hynix_nand_reg_write_op() is called.
Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
---
drivers/mtd/nand/raw/nand_hynix.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 8cbe77f447c7..4ffbb26e76d6 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -100,6 +100,16 @@ static int hynix_nand_reg_write_op(struct nand_chip *chip, u8 addr, u8 val)
struct mtd_info *mtd = nand_to_mtd(chip);
u16 column = ((u16)addr << 8) | addr;
+ if (chip->exec_op) {
+ struct nand_op_instr instrs[] = {
+ NAND_OP_ADDR(1, &addr, 0),
+ NAND_OP_8BIT_DATA_OUT(1, &val, 0),
+ };
+ struct nand_operation op = NAND_OPERATION(instrs);
+
+ return nand_exec_op(chip, &op);
+ }
+
chip->cmdfunc(mtd, NAND_CMD_NONE, column, -1);
chip->write_byte(mtd, val);
--
2.14.1
