4.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
[ Upstream commit b83687f359d9b4128073f06ab7a06489eb04aa7c ]
The LibreTech CC ("Le Potato") board provides four USB connectors.
These are provided by a hub which is connected to the SoC's USB
controller.
Enable the SoC's USB controller to make the USB ports usable. Also turn
on the HDMI_5V regulator when powering on the PHY because (even though
it's not shown in the schematics) HDMI_5V also supplies the USB VBUS.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 12 +++++++++++
1 file changed, 12 insertions(+)
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -271,3 +271,15 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ /*
+ * even though the schematics don't show it:
+ * HDMI_5V is also used as supply for the USB VBUS.
+ */
+ phy-supply = <&hdmi_5v>;
+};
