[PATCH 4.14 054/189] net: phy: marvell: clear wol event before setting it

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jingju Hou <Jingju.Hou@xxxxxxxxxxxxx>

[ Upstream commit b6a930fa88083b41d26ddf1cab95cbd740936c22 ]

If WOL event happened once, the LED[2] interrupt pin will not be
cleared unless we read the CSISR register. If interrupts are in use,
the normal interrupt handling will clear the WOL event. Let's clear the
WOL event before enabling it if !phy_interrupt_is_valid().

Signed-off-by: Jingju Hou <Jingju.Hou@xxxxxxxxxxxxx>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/phy/marvell.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1409,6 +1409,15 @@ static int m88e1318_set_wol(struct phy_d
 		if (err < 0)
 			return err;
 
+		/* If WOL event happened once, the LED[2] interrupt pin
+		 * will not be cleared unless we reading the interrupt status
+		 * register. If interrupts are in use, the normal interrupt
+		 * handling will clear the WOL event. Clear the WOL event
+		 * before enabling it if !phy_interrupt_is_valid()
+		 */
+		if (!phy_interrupt_is_valid(phydev))
+			phy_read(phydev, MII_M1011_IEVENT);
+
 		/* Enable the WOL interrupt */
 		temp = phy_read(phydev, MII_88E1318S_PHY_CSIER);
 		temp |= MII_88E1318S_PHY_CSIER_WOL_EIE;





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux