4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Ford <aford173@xxxxxxxxx>
[ Upstream commit 189822cbcbf3ea37c26a15612d8f922c440bc0e0 ]
The VAUX3 rail from the PMIC powers a clock driver which clocks
the WL127x. This corrects a bug which did not correctly associate
the vin-supply with the proper power rail.
This also fixes a typo in the pinmuxing to properly configure the
interrupt pin.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/logicpd-som-lv.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -26,7 +26,7 @@
gpio = <&gpio1 3 0>; /* gpio_3 */
startup-delay-us = <70000>;
enable-active-high;
- vin-supply = <&vmmc2>;
+ vin-supply = <&vaux3>;
};
/* HS USB Host PHY on PORT 1 */
@@ -235,7 +235,7 @@
};
wl127x_gpio: pinmux_wl127x_gpio_pin {
pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
@@ -270,6 +270,11 @@
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
&twl {
twl_power: power {
compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
