4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <f.fainelli@xxxxxxxxx>
[ Upstream commit 79fb218d97980d4fee9a64f4c8ff05289364ba25 ]
On newer PHYs, we need to select the expansion register to write with
setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior
to being migrated to generic code under bcm-phy-lib.c which
unfortunately used the older implementation from the BCM54xx days.
Fix this by creating an inline stub: bcm_write_exp_sel() which adds the
correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY
and BCM7xxx PHY drivers which require setting these bits.
broadcom.c is unchanged because some PHYs even use a different selector
method, so let them specify it directly (e.g: SerDes secondary selector).
Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/bcm-cygnus.c | 6 +++---
drivers/net/phy/bcm-phy-lib.h | 7 +++++++
drivers/net/phy/bcm7xxx.c | 4 ++--
3 files changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -61,17 +61,17 @@ static int bcm_cygnus_afe_config(struct
return rc;
/* make rcal=100, since rdb default is 000 */
- rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10);
+ rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB1, 0x10);
if (rc < 0)
return rc;
/* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
- rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10);
+ rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x10);
if (rc < 0)
return rc;
/* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
- rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00);
+ rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x00);
return 0;
}
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -14,11 +14,18 @@
#ifndef _LINUX_BCM_PHY_LIB_H
#define _LINUX_BCM_PHY_LIB_H
+#include <linux/brcmphy.h>
#include <linux/phy.h>
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+static inline int bcm_phy_write_exp_sel(struct phy_device *phydev,
+ u16 reg, u16 val)
+{
+ return bcm_phy_write_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER, val);
+}
+
int bcm_phy_write_misc(struct phy_device *phydev,
u16 reg, u16 chl, u16 value);
int bcm_phy_read_misc(struct phy_device *phydev,
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -48,10 +48,10 @@
static void r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
- bcm_phy_write_exp(phydev, 0x00b0, 0x0010);
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
/* Disable Reset R_AL/RC_CAL Engine */
- bcm_phy_write_exp(phydev, 0x00b0, 0x0000);
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
}
static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
