From: Peter Huewe <PeterHuewe@xxxxxx>
The 'get_burstcount' function can in some circumstances 'return -EBUSY' which
in tpm_stm_i2c_send is stored in an 'u32 burstcnt'
thus converting the signed value into an unsigned value, resulting
in 'burstcnt' being huge.
Changing the type to u32 only does not solve the problem as the signed
value is converted to an unsigned in I2C_WRITE_DATA, resulting in the
same effect.
Thus
-> Change type of burstcnt to u32 (the return type of get_burstcount)
-> Add a check for the return value of 'get_burstcount' and propagate a
potential error.
This makes also sense in the 'I2C_READ_DATA' case, where the there is no
signed/unsigned conversion.
found by coverity
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Peter Huewe <peterhuewe@xxxxxx>
---
drivers/char/tpm/tpm_i2c_stm_st33.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
index a0d6ceb5..cf68403 100644
--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ b/drivers/char/tpm/tpm_i2c_stm_st33.c
@@ -410,6 +410,8 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
&chip->vendor.read_queue)
== 0) {
burstcnt = get_burstcount(chip);
+ if (burstcnt < 0)
+ return burstcnt;
len = min_t(int, burstcnt, count - size);
I2C_READ_DATA(client, TPM_DATA_FIFO, buf + size, len);
size += len;
@@ -451,7 +453,8 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
size_t len)
{
- u32 status, burstcnt = 0, i, size;
+ u32 status, i, size;
+ int burstcnt = 0;
int ret;
u8 data;
struct i2c_client *client;
@@ -482,6 +485,8 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
for (i = 0; i < len - 1;) {
burstcnt = get_burstcount(chip);
+ if (burstcnt < 0)
+ return burstcnt;
size = min_t(int, len - i - 1, burstcnt);
ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size);
if (ret < 0)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html