The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 31d11b83b96faaee4bb514d375a09489117c3e8d Mon Sep 17 00:00:00 2001
From: Filipe Manana <fdmanana@xxxxxxxx>
Date: Wed, 9 May 2018 16:01:46 +0100
Subject: [PATCH] Btrfs: fix duplicate extents after fsync of file with
prealloc extents
In commit 471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay"), on fsync, we started to always log all prealloc
extents beyond an inode's i_size in order to avoid losing them after a
power failure. However under some cases this can lead to the log replay
code to create duplicate extent items, with different lengths, in the
extent tree. That happens because, as of that commit, we can now log
extent items based on extent maps that are not on the "modified" list
of extent maps of the inode's extent map tree. Logging extent items based
on extent maps is used during the fast fsync path to save time and for
this to work reliably it requires that the extent maps are not merged
with other adjacent extent maps - having the extent maps in the list
of modified extents gives such guarantee.
Consider the following example, captured during a long run of fsstress,
which illustrates this problem.
We have inode 271, in the filesystem tree (root 5), for which all of the
following operations and discussion apply to.
A buffered write starts at offset 312391 with a length of 933471 bytes
(end offset at 1245862). At this point we have, for this inode, the
following extent maps with the their field values:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 376832, block_start 1106399232,
block_len 376832, orig_block_len 376832
em C, start 417792, orig_start 417792, len 782336, block_start
18446744073709551613, block_len 0, orig_block_len 0
em D, start 1200128, orig_start 1200128, len 835584, block_start
1106776064, block_len 835584, orig_block_len 835584
em E, start 2035712, orig_start 2035712, len 245760, block_start
1107611648, block_len 245760, orig_block_len 245760
Extent map A corresponds to a hole and extent maps D and E correspond to
preallocated extents.
Extent map D ends where extent map E begins (1106776064 + 835584 =
1107611648), but these extent maps were not merged because they are in
the inode's list of modified extent maps.
An fsync against this inode is made, which triggers the fast path
(BTRFS_INODE_NEEDS_FULL_SYNC is not set). This fsync triggers writeback
of the data previously written using buffered IO, and when the respective
ordered extent finishes, btrfs_drop_extents() is called against the
(aligned) range 311296..1249279. This causes a split of extent map D at
btrfs_drop_extent_cache(), replacing extent map D with a new extent map
D', also added to the list of modified extents, with the following
values:
em D', start 1249280, orig_start of 1200128,
block_start 1106825216 (= 1106776064 + 1249280 - 1200128),
orig_block_len 835584,
block_len 786432 (835584 - (1249280 - 1200128))
Then, during the fast fsync, btrfs_log_changed_extents() is called and
extent maps D' and E are removed from the list of modified extents. The
flag EXTENT_FLAG_LOGGING is also set on them. After the extents are logged
clear_em_logging() is called on each of them, and that makes extent map E
to be merged with extent map D' (try_merge_map()), resulting in D' being
deleted and E adjusted to:
em E, start 1249280, orig_start 1200128, len 1032192,
block_start 1106825216, block_len 1032192,
orig_block_len 245760
A direct IO write at offset 1847296 and length of 360448 bytes (end offset
at 2207744) starts, and at that moment the following extent maps exist for
our inode:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
block_len 937984, orig_block_len 937984
em E (prealloc), start 1249280, orig_start 1200128, len 1032192,
block_start 1106825216, block_len 1032192, orig_block_len 245760
The dio write results in drop_extent_cache() being called twice. The first
time for a range that starts at offset 1847296 and ends at offset 2035711
(length of 188416), which results in a double split of extent map E,
replacing it with two new extent maps:
em F, start 1249280, orig_start 1200128, block_start 1106825216,
block_len 598016, orig_block_len 598016
em G, start 2035712, orig_start 1200128, block_start 1107611648,
block_len 245760, orig_block_len 1032192
It also creates a new extent map that represents a part of the requested
IO (through create_io_em()):
em H, start 1847296, len 188416, block_start 1107423232, block_len 188416
The second call to drop_extent_cache() has a range with a start offset of
2035712 and end offset of 2207743 (length of 172032). This leads to
replacing extent map G with a new extent map I with the following values:
em I, start 2207744, orig_start 1200128, block_start 1107783680,
block_len 73728, orig_block_len 1032192
It also creates a new extent map that represents the second part of the
requested IO (through create_io_em()):
em J, start 2035712, len 172032, block_start 1107611648, block_len 172032
The dio write set the inode's i_size to 2207744 bytes.
After the dio write the inode has the following extent maps:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
block_len 937984, orig_block_len 937984
em F, start 1249280, orig_start 1200128, len 598016,
block_start 1106825216, block_len 598016, orig_block_len 598016
em H, start 1847296, orig_start 1200128, len 188416,
block_start 1107423232, block_len 188416, orig_block_len 835584
em J, start 2035712, orig_start 2035712, len 172032,
block_start 1107611648, block_len 172032, orig_block_len 245760
em I, start 2207744, orig_start 1200128, len 73728,
block_start 1107783680, block_len 73728, orig_block_len 1032192
Now do some change to the file, like adding a xattr for example and then
fsync it again. This triggers a fast fsync path, and as of commit
471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size after fsync
log replay"), we use the extent map I to log a file extent item because
it's a prealloc extent and it starts at an offset matching the inode's
i_size. However when we log it, we create a file extent item with a value
for the disk byte location that is wrong, as can be seen from the
following output of "btrfs inspect-internal dump-tree":
item 1 key (271 EXTENT_DATA 2207744) itemoff 3782 itemsize 53
generation 22 type 2 (prealloc)
prealloc data disk byte 1106776064 nr 1032192
prealloc data offset 1007616 nr 73728
Here the disk byte value corresponds to calculation based on some fields
from the extent map I:
1106776064 = block_start (1107783680) - 1007616 (extent_offset)
extent_offset = 2207744 (start) - 1200128 (orig_start) = 1007616
The disk byte value of 1106776064 clashes with disk byte values of the
file extent items at offsets 1249280 and 1847296 in the fs tree:
item 6 key (271 EXTENT_DATA 1249280) itemoff 3568 itemsize 53
generation 20 type 2 (prealloc)
prealloc data disk byte 1106776064 nr 835584
prealloc data offset 49152 nr 598016
item 7 key (271 EXTENT_DATA 1847296) itemoff 3515 itemsize 53
generation 20 type 1 (regular)
extent data disk byte 1106776064 nr 835584
extent data offset 647168 nr 188416 ram 835584
extent compression 0 (none)
item 8 key (271 EXTENT_DATA 2035712) itemoff 3462 itemsize 53
generation 20 type 1 (regular)
extent data disk byte 1107611648 nr 245760
extent data offset 0 nr 172032 ram 245760
extent compression 0 (none)
item 9 key (271 EXTENT_DATA 2207744) itemoff 3409 itemsize 53
generation 20 type 2 (prealloc)
prealloc data disk byte 1107611648 nr 245760
prealloc data offset 172032 nr 73728
Instead of the disk byte value of 1106776064, the value of 1107611648
should have been logged. Also the data offset value should have been
172032 and not 1007616.
After a log replay we end up getting two extent items in the extent tree
with different lengths, one of 835584, which is correct and existed
before the log replay, and another one of 1032192 which is wrong and is
based on the logged file extent item:
item 12 key (1106776064 EXTENT_ITEM 835584) itemoff 3406 itemsize 53
refs 2 gen 15 flags DATA
extent data backref root 5 objectid 271 offset 1200128 count 2
item 13 key (1106776064 EXTENT_ITEM 1032192) itemoff 3353 itemsize 53
refs 1 gen 22 flags DATA
extent data backref root 5 objectid 271 offset 1200128 count 1
Obviously this leads to many problems and a filesystem check reports many
errors:
(...)
checking extents
Extent back ref already exists for 1106776064 parent 0 root 5 owner 271 offset 1200128 num_refs 1
extent item 1106776064 has multiple extent items
ref mismatch on [1106776064 835584] extent item 2, found 3
Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 2 wanted 1 back 0x55b1d0ad7680
Backref 1106776064 root 5 owner 271 offset 1200128 num_refs 0 not found in extent tree
Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 1 wanted 0 back 0x55b1d0ad4e70
Backref bytes do not match extent backref, bytenr=1106776064, ref bytes=835584, backref bytes=1032192
backpointer mismatch on [1106776064 835584]
checking free space cache
block group 1103101952 has wrong amount of free space
failed to load free space cache for block group 1103101952
checking fs roots
(...)
So fix this by logging the prealloc extents beyond the inode's i_size
based on searches in the subvolume tree instead of the extent maps.
Fixes: 471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay")
CC: stable@xxxxxxxxxxxxxxx # 4.14+
Signed-off-by: Filipe Manana <fdmanana@xxxxxxxx>
Signed-off-by: David Sterba <dsterba@xxxxxxxx>
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c1509547c762..8f23a94dab77 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -4320,6 +4320,110 @@ static int log_one_extent(struct btrfs_trans_handle *trans,
return ret;
}
+/*
+ * Log all prealloc extents beyond the inode's i_size to make sure we do not
+ * lose them after doing a fast fsync and replaying the log. We scan the
+ * subvolume's root instead of iterating the inode's extent map tree because
+ * otherwise we can log incorrect extent items based on extent map conversion.
+ * That can happen due to the fact that extent maps are merged when they
+ * are not in the extent map tree's list of modified extents.
+ */
+static int btrfs_log_prealloc_extents(struct btrfs_trans_handle *trans,
+ struct btrfs_inode *inode,
+ struct btrfs_path *path)
+{
+ struct btrfs_root *root = inode->root;
+ struct btrfs_key key;
+ const u64 i_size = i_size_read(&inode->vfs_inode);
+ const u64 ino = btrfs_ino(inode);
+ struct btrfs_path *dst_path = NULL;
+ u64 last_extent = (u64)-1;
+ int ins_nr = 0;
+ int start_slot;
+ int ret;
+
+ if (!(inode->flags & BTRFS_INODE_PREALLOC))
+ return 0;
+
+ key.objectid = ino;
+ key.type = BTRFS_EXTENT_DATA_KEY;
+ key.offset = i_size;
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0)
+ goto out;
+
+ while (true) {
+ struct extent_buffer *leaf = path->nodes[0];
+ int slot = path->slots[0];
+
+ if (slot >= btrfs_header_nritems(leaf)) {
+ if (ins_nr > 0) {
+ ret = copy_items(trans, inode, dst_path, path,
+ &last_extent, start_slot,
+ ins_nr, 1, 0);
+ if (ret < 0)
+ goto out;
+ ins_nr = 0;
+ }
+ ret = btrfs_next_leaf(root, path);
+ if (ret < 0)
+ goto out;
+ if (ret > 0) {
+ ret = 0;
+ break;
+ }
+ continue;
+ }
+
+ btrfs_item_key_to_cpu(leaf, &key, slot);
+ if (key.objectid > ino)
+ break;
+ if (WARN_ON_ONCE(key.objectid < ino) ||
+ key.type < BTRFS_EXTENT_DATA_KEY ||
+ key.offset < i_size) {
+ path->slots[0]++;
+ continue;
+ }
+ if (last_extent == (u64)-1) {
+ last_extent = key.offset;
+ /*
+ * Avoid logging extent items logged in past fsync calls
+ * and leading to duplicate keys in the log tree.
+ */
+ do {
+ ret = btrfs_truncate_inode_items(trans,
+ root->log_root,
+ &inode->vfs_inode,
+ i_size,
+ BTRFS_EXTENT_DATA_KEY);
+ } while (ret == -EAGAIN);
+ if (ret)
+ goto out;
+ }
+ if (ins_nr == 0)
+ start_slot = slot;
+ ins_nr++;
+ path->slots[0]++;
+ if (!dst_path) {
+ dst_path = btrfs_alloc_path();
+ if (!dst_path) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ }
+ }
+ if (ins_nr > 0) {
+ ret = copy_items(trans, inode, dst_path, path, &last_extent,
+ start_slot, ins_nr, 1, 0);
+ if (ret > 0)
+ ret = 0;
+ }
+out:
+ btrfs_release_path(path);
+ btrfs_free_path(dst_path);
+ return ret;
+}
+
static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_inode *inode,
@@ -4362,6 +4466,11 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans,
if (em->generation <= test_gen)
continue;
+ /* We log prealloc extents beyond eof later. */
+ if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags) &&
+ em->start >= i_size_read(&inode->vfs_inode))
+ continue;
+
if (em->start < logged_start)
logged_start = em->start;
if ((em->start + em->len - 1) > logged_end)
@@ -4374,31 +4483,6 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans,
num++;
}
- /*
- * Add all prealloc extents beyond the inode's i_size to make sure we
- * don't lose them after doing a fast fsync and replaying the log.
- */
- if (inode->flags & BTRFS_INODE_PREALLOC) {
- struct rb_node *node;
-
- for (node = rb_last(&tree->map); node; node = rb_prev(node)) {
- em = rb_entry(node, struct extent_map, rb_node);
- if (em->start < i_size_read(&inode->vfs_inode))
- break;
- if (!list_empty(&em->list))
- continue;
- /* Same as above loop. */
- if (++num > 32768) {
- list_del_init(&tree->modified_extents);
- ret = -EFBIG;
- goto process;
- }
- refcount_inc(&em->refs);
- set_bit(EXTENT_FLAG_LOGGING, &em->flags);
- list_add_tail(&em->list, &extents);
- }
- }
-
list_sort(NULL, &extents, extent_cmp);
btrfs_get_logged_extents(inode, logged_list, logged_start, logged_end);
/*
@@ -4443,6 +4527,9 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans,
up_write(&inode->dio_sem);
btrfs_release_path(path);
+ if (!ret)
+ ret = btrfs_log_prealloc_extents(trans, inode, path);
+
return ret;
}
