Re: [Intel-gfx] [PATCH] Revert "drm/i915/edp: Allow alternate fixed mode for eDP if available."

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2018-05-16 at 11:01 +0300, Jani Nikula wrote:
> This reverts commit dc911f5bd8aacfcf8aabd5c26c88e04c837a938e.
> 
> Per the report, no matter what display mode you select with xrandr,
> the
> i915 driver will always select the alternate fixed mode. For the
> reporter this means that the display will always run at 40Hz which is
> quite annoying. This may be due to the mode comparison.
> 
> But there are some other potential issues. The choice of
> alt_fixed_mode
> seems dubious. It's the first non-preferred mode, but there are no
> guarantees that the only difference would be refresh rate. Similarly,
> there may be more than one preferred mode in the probed modes list,
> and
> the commit changes the preferred mode selection to choose the last
> one
> on the list instead of the first.
> 
> (Note that the probed modes list is the raw, unfiltered, unsorted
> list
> of modes from drm_add_edid_modes(), not the pretty result after a
> drm_helper_probe_single_connector_modes() call.)
> 
> Finally, we already have eerily similar code in place to find the
> downclock mode for DRRS that seems like could be reused here.
> 
> Back to the drawing board.
> 
> Note: This is a hand-crafted revert due to conflicts. If it fails to
> backport, please just try reverting the original commit directly.
> 
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105469
> Reported-by: Rune Petersen <rune@xxxxxxxxxxxx>
> Reported-by: Mark Spencer <n7u4722r35@xxxxxxxxxxxxxxxxx>
> Fixes: dc911f5bd8aa ("drm/i915/edp: Allow alternate fixed mode for
> eDP if available.")
> Cc: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
> Cc: David Weinehall <david.weinehall@xxxxxxxxxxxxxxx>
> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> Cc: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: <stable@xxxxxxxxxxxxxxx> # v4.14+
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_dp.c    | 38 +++++-----------------------
> ----------
>  drivers/gpu/drm/i915/intel_drv.h   |  2 --
>  drivers/gpu/drm/i915/intel_dsi.c   |  2 +-
>  drivers/gpu/drm/i915/intel_dvo.c   |  2 +-
>  drivers/gpu/drm/i915/intel_lvds.c  |  3 +--
>  drivers/gpu/drm/i915/intel_panel.c |  6 ------
>  6 files changed, 8 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c
> b/drivers/gpu/drm/i915/intel_dp.c
> index dde92e4af5d3..8320f0e8e3be 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1679,23 +1679,6 @@ static int intel_dp_compute_bpp(struct
> intel_dp *intel_dp,
>  	return bpp;
>  }
>  
> -static bool intel_edp_compare_alt_mode(struct drm_display_mode *m1,
> -				       struct drm_display_mode *m2)
> -{
> -	bool bres = false;
> -
> -	if (m1 && m2)
> -		bres = (m1->hdisplay == m2->hdisplay &&
> -			m1->hsync_start == m2->hsync_start &&
> -			m1->hsync_end == m2->hsync_end &&
> -			m1->htotal == m2->htotal &&
> -			m1->vdisplay == m2->vdisplay &&
> -			m1->vsync_start == m2->vsync_start &&
> -			m1->vsync_end == m2->vsync_end &&
> -			m1->vtotal == m2->vtotal);
> -	return bres;
> -}
> -
>  /* Adjust link config limits based on compliance test requests. */
>  static void
>  intel_dp_adjust_compliance_config(struct intel_dp *intel_dp,
> @@ -1860,16 +1843,8 @@ intel_dp_compute_config(struct intel_encoder
> *encoder,
>  		pipe_config->has_audio = intel_conn_state-
> >force_audio == HDMI_AUDIO_ON;
>  
>  	if (intel_dp_is_edp(intel_dp) && intel_connector-
> >panel.fixed_mode) {
> -		struct drm_display_mode *panel_mode =
> -			intel_connector->panel.alt_fixed_mode;
> -		struct drm_display_mode *req_mode = &pipe_config-
> >base.mode;
> -
> -		if (!intel_edp_compare_alt_mode(req_mode,
> panel_mode))
> -			panel_mode = intel_connector-
> >panel.fixed_mode;
> -
> -		drm_mode_debug_printmodeline(panel_mode);
> -
> -		intel_fixed_panel_mode(panel_mode, adjusted_mode);
> +		intel_fixed_panel_mode(intel_connector-
> >panel.fixed_mode,
> +				       adjusted_mode);
>  
>  		if (INTEL_GEN(dev_priv) >= 9) {
>  			int ret;
> @@ -6159,7 +6134,6 @@ static bool intel_edp_init_connector(struct
> intel_dp *intel_dp,
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  	struct drm_connector *connector = &intel_connector->base;
>  	struct drm_display_mode *fixed_mode = NULL;
> -	struct drm_display_mode *alt_fixed_mode = NULL;
>  	struct drm_display_mode *downclock_mode = NULL;
>  	bool has_dpcd;
>  	struct drm_display_mode *scan;
> @@ -6214,14 +6188,13 @@ static bool intel_edp_init_connector(struct
> intel_dp *intel_dp,
>  	}
>  	intel_connector->edid = edid;
>  
> -	/* prefer fixed mode from EDID if available, save an alt
> mode also */
> +	/* prefer fixed mode from EDID if available */
>  	list_for_each_entry(scan, &connector->probed_modes, head) {
>  		if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
>  			fixed_mode = drm_mode_duplicate(dev, scan);
>  			downclock_mode = intel_dp_drrs_init(
>  						intel_connector,
> fixed_mode);
> -		} else if (!alt_fixed_mode) {
> -			alt_fixed_mode = drm_mode_duplicate(dev,
> scan);
> +			break;

If multiple preferred modes are present, we'll now end up calling
drrs_init() only for the first. I see that this is what the original
code did but this revert does more than removing support for alternate
modes.

>  		}
>  	}
>  
> @@ -6258,8 +6231,7 @@ static bool intel_edp_init_connector(struct
> intel_dp *intel_dp,
>  			      pipe_name(pipe));
>  	}
>  
> -	intel_panel_init(&intel_connector->panel, fixed_mode,
> alt_fixed_mode,
> -			 downclock_mode);
> +	intel_panel_init(&intel_connector->panel, fixed_mode,
> downclock_mode);
>  	intel_connector->panel.backlight.power =
> intel_edp_backlight_power;
>  	intel_panel_setup_backlight(connector, pipe);
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index d7dbca1aabff..0361130500a6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -277,7 +277,6 @@ struct intel_encoder {
>  
>  struct intel_panel {
>  	struct drm_display_mode *fixed_mode;
> -	struct drm_display_mode *alt_fixed_mode;
>  	struct drm_display_mode *downclock_mode;
>  
>  	/* backlight */
> @@ -1850,7 +1849,6 @@ void intel_overlay_reset(struct
> drm_i915_private *dev_priv);
>  /* intel_panel.c */
>  int intel_panel_init(struct intel_panel *panel,
>  		     struct drm_display_mode *fixed_mode,
> -		     struct drm_display_mode *alt_fixed_mode,
>  		     struct drm_display_mode *downclock_mode);
>  void intel_panel_fini(struct intel_panel *panel);
>  void intel_fixed_panel_mode(const struct drm_display_mode
> *fixed_mode,
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index 51a1d6868b1e..cf39ca90d887 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -1846,7 +1846,7 @@ void intel_dsi_init(struct drm_i915_private
> *dev_priv)
>  	connector->display_info.width_mm = fixed_mode->width_mm;
>  	connector->display_info.height_mm = fixed_mode->height_mm;
>  
> -	intel_panel_init(&intel_connector->panel, fixed_mode, NULL,
> NULL);
> +	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
>  	intel_panel_setup_backlight(connector, INVALID_PIPE);
>  
>  	intel_dsi_add_properties(intel_connector);
> diff --git a/drivers/gpu/drm/i915/intel_dvo.c
> b/drivers/gpu/drm/i915/intel_dvo.c
> index eb0c559b2715..a70d767313aa 100644
> --- a/drivers/gpu/drm/i915/intel_dvo.c
> +++ b/drivers/gpu/drm/i915/intel_dvo.c
> @@ -536,7 +536,7 @@ void intel_dvo_init(struct drm_i915_private
> *dev_priv)
>  			 */
>  			intel_panel_init(&intel_connector->panel,
>  					 intel_dvo_get_current_mode(
> intel_encoder),
> -					 NULL, NULL);
> +					 NULL);
>  			intel_dvo->panel_wants_dither = true;
>  		}
>  
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c
> b/drivers/gpu/drm/i915/intel_lvds.c
> index 8691c86f579c..d8ece907ff54 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -1140,8 +1140,7 @@ void intel_lvds_init(struct drm_i915_private
> *dev_priv)
>  out:
>  	mutex_unlock(&dev->mode_config.mutex);
>  
> -	intel_panel_init(&intel_connector->panel, fixed_mode, NULL,
> -			 downclock_mode);
> +	intel_panel_init(&intel_connector->panel, fixed_mode,
> downclock_mode);
>  	intel_panel_setup_backlight(connector, INVALID_PIPE);
>  
>  	lvds_encoder->is_dual_link =
> compute_is_dual_link_lvds(lvds_encoder);
> diff --git a/drivers/gpu/drm/i915/intel_panel.c
> b/drivers/gpu/drm/i915/intel_panel.c
> index 41d00b1603e3..b443278e569c 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -1928,13 +1928,11 @@ intel_panel_init_backlight_funcs(struct
> intel_panel *panel)
>  
>  int intel_panel_init(struct intel_panel *panel,
>  		     struct drm_display_mode *fixed_mode,
> -		     struct drm_display_mode *alt_fixed_mode,
>  		     struct drm_display_mode *downclock_mode)
>  {
>  	intel_panel_init_backlight_funcs(panel);
>  
>  	panel->fixed_mode = fixed_mode;
> -	panel->alt_fixed_mode = alt_fixed_mode;
>  	panel->downclock_mode = downclock_mode;
>  
>  	return 0;
> @@ -1948,10 +1946,6 @@ void intel_panel_fini(struct intel_panel
> *panel)
>  	if (panel->fixed_mode)
>  		drm_mode_destroy(intel_connector->base.dev, panel-
> >fixed_mode);
>  
> -	if (panel->alt_fixed_mode)
> -		drm_mode_destroy(intel_connector->base.dev,
> -				panel->alt_fixed_mode);
> -
>  	if (panel->downclock_mode)
>  		drm_mode_destroy(intel_connector->base.dev,
>  				panel->downclock_mode);



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux