Hi Boris,
On Thu, 3 May 2018 09:49:08 +0200, Boris Brezillon
<boris.brezillon@xxxxxxxxxxx> wrote:
> It looks like the NAND_STATUS_FAIL bit is sticky after an ECC failure,
> which leads all READ operations following the failing one to report
> an ECC failure. Reset the chip to clear the NAND_STATUS_FAIL bit.
>
> Note that this behavior is not document in the datasheet, but resetting
> the chip is the only solution we found to fix the problem.
>
> Fixes: 9748e1d87573 ("mtd: nand: add support for Micron on-die ECC")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
> Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
> Cc: Bean Huo <beanhuo@xxxxxxxxxx>
> Cc: Peter Pan <peterpandong@xxxxxxxxxx>
> ---
Reviewed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
