FAILED: patch "[PATCH] powerpc/powernv/npu: Add lock to prevent race in concurrent" failed to apply to 4.14-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 28a5933e8d362766462ea9e5f135e19f41e658ba Mon Sep 17 00:00:00 2001
From: Alistair Popple <alistair@xxxxxxxxxxxx>
Date: Wed, 11 Apr 2018 16:38:54 +1000
Subject: [PATCH] powerpc/powernv/npu: Add lock to prevent race in concurrent
 context init/destroy

The pnv_npu2_init_context() and pnv_npu2_destroy_context() functions
are used to allocate/free contexts to allow address translation and
shootdown by the NPU on a particular GPU. Context initialisation is
implicitly safe as it is protected by the requirement mmap_sem be held
in write mode, however pnv_npu2_destroy_context() does not require
mmap_sem to be held and it is not safe to call with a concurrent
initialisation for a different GPU.

It was assumed the driver would ensure destruction was not called
concurrently with initialisation. However the driver may be simplified
by allowing concurrent initialisation and destruction for different
GPUs. As npu context creation/destruction is not a performance
critical path and the critical section is not large a single spinlock
is used for simplicity.

Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2")
Cc: stable@xxxxxxxxxxxxxxx # v4.12+
Signed-off-by: Alistair Popple <alistair@xxxxxxxxxxxx>
Reviewed-by: Mark Hairgrove <mhairgrove@xxxxxxxxxx>
Tested-by: Mark Hairgrove <mhairgrove@xxxxxxxxxx>
Reviewed-by: Balbir Singh <bsingharora@xxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>

diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index 69a4f9e8bd55..5ff7c6e0e6da 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -33,6 +33,12 @@
 
 #define npu_to_phb(x) container_of(x, struct pnv_phb, npu)
 
+/*
+ * spinlock to protect initialisation of an npu_context for a particular
+ * mm_struct.
+ */
+static DEFINE_SPINLOCK(npu_context_lock);
+
 /*
  * Other types of TCE cache invalidation are not functional in the
  * hardware.
@@ -696,7 +702,8 @@ static const struct mmu_notifier_ops nv_nmmu_notifier_ops = {
  * Returns an error if there no contexts are currently available or a
  * npu_context which should be passed to pnv_npu2_handle_fault().
  *
- * mmap_sem must be held in write mode.
+ * mmap_sem must be held in write mode and must not be called from interrupt
+ * context.
  */
 struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 			unsigned long flags,
@@ -743,7 +750,9 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 	/*
 	 * Setup the NPU context table for a particular GPU. These need to be
 	 * per-GPU as we need the tables to filter ATSDs when there are no
-	 * active contexts on a particular GPU.
+	 * active contexts on a particular GPU. It is safe for these to be
+	 * called concurrently with destroy as the OPAL call takes appropriate
+	 * locks and refcounts on init/destroy.
 	 */
 	rc = opal_npu_init_context(nphb->opal_id, mm->context.id, flags,
 				PCI_DEVID(gpdev->bus->number, gpdev->devfn));
@@ -754,8 +763,19 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 	 * We store the npu pci device so we can more easily get at the
 	 * associated npus.
 	 */
+	spin_lock(&npu_context_lock);
 	npu_context = mm->context.npu_context;
+	if (npu_context)
+		WARN_ON(!kref_get_unless_zero(&npu_context->kref));
+	spin_unlock(&npu_context_lock);
+
 	if (!npu_context) {
+		/*
+		 * We can set up these fields without holding the
+		 * npu_context_lock as the npu_context hasn't been returned to
+		 * the caller meaning it can't be destroyed. Parallel allocation
+		 * is protected against by mmap_sem.
+		 */
 		rc = -ENOMEM;
 		npu_context = kzalloc(sizeof(struct npu_context), GFP_KERNEL);
 		if (npu_context) {
@@ -774,8 +794,6 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 		}
 
 		mm->context.npu_context = npu_context;
-	} else {
-		WARN_ON(!kref_get_unless_zero(&npu_context->kref));
 	}
 
 	npu_context->release_cb = cb;
@@ -814,15 +832,16 @@ static void pnv_npu2_release_context(struct kref *kref)
 		mm_context_remove_copro(npu_context->mm);
 
 	npu_context->mm->context.npu_context = NULL;
-	mmu_notifier_unregister(&npu_context->mn,
-				npu_context->mm);
-
-	kfree(npu_context);
 }
 
+/*
+ * Destroy a context on the given GPU. May free the npu_context if it is no
+ * longer active on any GPUs. Must not be called from interrupt context.
+ */
 void pnv_npu2_destroy_context(struct npu_context *npu_context,
 			struct pci_dev *gpdev)
 {
+	int removed;
 	struct pnv_phb *nphb;
 	struct npu *npu;
 	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
@@ -844,7 +863,21 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context,
 	WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], NULL);
 	opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
 				PCI_DEVID(gpdev->bus->number, gpdev->devfn));
-	kref_put(&npu_context->kref, pnv_npu2_release_context);
+	spin_lock(&npu_context_lock);
+	removed = kref_put(&npu_context->kref, pnv_npu2_release_context);
+	spin_unlock(&npu_context_lock);
+
+	/*
+	 * We need to do this outside of pnv_npu2_release_context so that it is
+	 * outside the spinlock as mmu_notifier_destroy uses SRCU.
+	 */
+	if (removed) {
+		mmu_notifier_unregister(&npu_context->mn,
+					npu_context->mm);
+
+		kfree(npu_context);
+	}
+
 }
 EXPORT_SYMBOL(pnv_npu2_destroy_context);
 




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]