Dear Greg,
a fix for a voltage instability on our rk3399-puma board went into 4.15
(commit 87eba0716011, quoted below). As we have users who prefer to stay
on longterm 4.14, would you consider cherry-picking the commit into
4.14.y? It applies cleanly and has no effect outside of our rk3399-puma
board, where it fixes the instability.
Thank you and best regards,
Jakob
commit 87eba0716011e528f7841026f2cc65683219d0ad
Author: Klaus Goger <klaus.goger@xxxxxxxxxxxxxxxxxxxxx>
Date: Tue Dec 5 08:11:58 2017 +0100
arm64: dts: rockchip: remove vdd_log from rk3399-puma
vdd_log has no consumer and therefore will not be set to a specific
voltage. Still the PWM output pin gets configured and thence the vdd_log
output voltage will changed from it's default. Depending on the idle
state of the PWM this will slightly over or undervoltage the logic supply
of the RK3399 and cause instability with GbE (undervoltage) and PCIe
(overvoltage). Since the default value set by a voltage divider is the
correct supply voltage and we don't need to change it during runtime we
remove the rail from the devicetree completely so the PWM pin will not
be configured.
Signed-off-by: Klaus Goger <klaus.goger@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 11 -----------
1 file changed, 11 deletions(-)