Re: [PATCH v2] rtlwifi: cleanup 8723be ant_sel definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/20/2018 07:01 AM, Kalle Valo wrote:
<pkshih@xxxxxxxxxxx> writes:

From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>

The module parameter ant_sel is used to control antenna number and path.
There is an existing enum ANT_{X2,X1} defined the antenna number, so
add a new enum ANT_{MAIN,AUX} to make it readable. After this work,
incorrect given values depend on ant_sel were exposed, so refill values
according following definition:
   ant_sel   ant_num   ant_path  print_label
      1      ANT_X1    ANT_AUX        #2
      2      ANT_X2    ANT_MAIN       #1
Then, a workaround resulted from the incorrect values in halbtcoutsrc.c was
removed. These is a existing bug in the workaround while ant_sel=2, but the
case is rare use so user is hard to observe this bug.

The experimental results with single antenna connected to specific path
are in following:
   ant_sel  ANT_MAIN(#1)  ANT_AUX(#2)
      0        -8            -62
      1        -62           -10
      2        -6            -60

Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Cc: Stable <stable@xxxxxxxxxxxxxxx> # 4.7+
Reviewed-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
v2: Add more description about fixed bugs in end of first paragraph.

Sorry, I still don't understand the bug you are fixing. It shouldn't
take more than one minute to understand a commit log.

I prose that you rewrite the commit log, or at least parts of if it.
When you are describing a bug don't talk about enums or source files,
that's an implementation detail, and instead talk how the bug looks like
from users point of view. For example:

   "On HP laptop model 1234 with Realtex 4321 device users are supposed
    to use ant_sel module parameter with value 77 to use the correct
    antenna. But instead rtlwifi incorrectly chose antenna 88 with lower
    transmit power and that caused packet loss. Fix it so that the user
    gets better transmit power and..."

(that's of course all made up information as I don't know what the
actual bug is)

And after that you can write rtlwifi internals in the commit log as much
as you want :) But there needs to be a clear generic description of the
bug first and it needs to understandable in one read.

To make this faster I propose that you send the new commit log as a
reply to this mail and I can then comment faster.

Kalle,

As I have some responsibility in creating this mess, let me try to write a new commit log. I hope this answers your questions.

Thanks,

Larry

====================================

Some HP laptops have only a single wifi antenna. This would not be a problem except that they were shipped with an incorrectly encoded EFUSE. It should have been possible to open the computer and transfer the antenna connection to the other terminal except that such action might void the warranty, and moving the antenna broke the Windows driver. The fix was to add a module option that would override the EFUSE encoding. That was done with commit c18d8f509571 ("rtlwifi: rtl8723be: Add antenna select module parameter"). There was still a problem with Bluetooth coexistence, which was addressed with commit baa170229095 ("rtlwifi: btcoexist: Implement antenna selection"). There were still problems, thus there were commit 0ff78adeef11 ("rtlwifi: rtl8723be: fix ant_sel code") and commit 6d6226928369 ("rtlwifi: btcoexist: Fix antenna selection code"). Despite all these attempts at fixing the problem, the code is not yet right. A proper fix is important as there are now instances of laptops having RTL8723DE chips with the same problem.

The module parameter ant_sel is used to control antenna number and path.
At present enum ANT_{X2,X1} is used to define the antenna number, but this choice is not intuitive, thus change to a new enum ANT_{MAIN,AUX} to make it more readable. This change showed examples where incorrect values were used. It was also possible to remove a workaround in halbtcoutsrc.c.

The experimental results with single antenna connected to specific path
are now as follows:
  ant_sel  ANT_MAIN(#1)  ANT_AUX(#2)
     0        -8            -62
     1        -62           -10
     2        -6            -60

Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Fixes: c18d8f509571 ("rtlwifi: rtl8723be: Add antenna select module parameter")
Fixes: baa170229095 ("rtlwifi: btcoexist: Implement antenna selection")
Fixes: 0ff78adeef11 ("rtlwifi: rtl8723be: fix ant_sel code")
Fixes: 6d6226928369 ("rtlwifi: btcoexist: Fix antenna selection code")
Cc: Stable <stable@xxxxxxxxxxxxxxx> # 4.7+
Reviewed-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]