FAILED: patch "[PATCH] powerpc/64s: Fix dt_cpu_ftrs to have restore_cpu clear" failed to apply to 4.9-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From a57ac411832384eb93df4bfed2bf644c4089720e Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@xxxxxxxxx>
Date: Thu, 5 Apr 2018 15:50:49 +1000
Subject: [PATCH] powerpc/64s: Fix dt_cpu_ftrs to have restore_cpu clear
 unwanted LPCR bits

Presently the dt_cpu_ftrs restore_cpu will only add bits to the LPCR
for secondaries, but some bits must be removed (e.g., UPRT for HPT).
Not clearing these bits on secondaries causes checkstops when booting
with disable_radix.

restore_cpu can not just set LPCR, because it is also called by the
idle wakeup code which relies on opal_slw_set_reg to restore the value
of LPCR, at least on P8 which does not save LPCR to stack in the idle
code.

Fix this by including a mask of bits to clear from LPCR as well, which
is used by restore_cpu.

This is a little messy now, but it's a minimal fix that can be
backported.  Longer term, the idle SPR save/restore code can be
reworked to completely avoid calls to restore_cpu, then restore_cpu
would be able to unconditionally set LPCR to match boot processor
environment.

Fixes: 5a61ef74f269f ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@xxxxxxxxxxxxxxx # v4.12+
Signed-off-by: Nicholas Piggin <npiggin@xxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>

diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 11a3a4fed3fb..ed7605d8fd2d 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -83,6 +83,7 @@ static int hv_mode;
 
 static struct {
 	u64	lpcr;
+	u64	lpcr_clear;
 	u64	hfscr;
 	u64	fscr;
 } system_registers;
@@ -91,6 +92,8 @@ static void (*init_pmu_registers)(void);
 
 static void __restore_cpu_cpufeatures(void)
 {
+	u64 lpcr;
+
 	/*
 	 * LPCR is restored by the power on engine already. It can be changed
 	 * after early init e.g., by radix enable, and we have no unified API
@@ -103,8 +106,10 @@ static void __restore_cpu_cpufeatures(void)
 	 * The best we can do to accommodate secondary boot and idle restore
 	 * for now is "or" LPCR with existing.
 	 */
-
-	mtspr(SPRN_LPCR, system_registers.lpcr | mfspr(SPRN_LPCR));
+	lpcr = mfspr(SPRN_LPCR);
+	lpcr |= system_registers.lpcr;
+	lpcr &= ~system_registers.lpcr_clear;
+	mtspr(SPRN_LPCR, lpcr);
 	if (hv_mode) {
 		mtspr(SPRN_LPID, 0);
 		mtspr(SPRN_HFSCR, system_registers.hfscr);
@@ -324,8 +329,9 @@ static int __init feat_enable_mmu_hash_v3(struct dt_cpu_feature *f)
 {
 	u64 lpcr;
 
+	system_registers.lpcr_clear |= (LPCR_ISL | LPCR_UPRT | LPCR_HR);
 	lpcr = mfspr(SPRN_LPCR);
-	lpcr &= ~LPCR_ISL;
+	lpcr &= ~(LPCR_ISL | LPCR_UPRT | LPCR_HR);
 	mtspr(SPRN_LPCR, lpcr);
 
 	cur_cpu_spec->mmu_features |= MMU_FTRS_HASH_BASE;




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]