The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From a0e9576634f0bcfa5c4d8efdcf8c9b28298d7570 Mon Sep 17 00:00:00 2001
From: Bastian Stender <bst@xxxxxxxxxxxxxx>
Date: Thu, 8 Mar 2018 15:08:11 +0100
Subject: [PATCH] mmc: block: fix updating ext_csd caches on ioctl call
PARTITION_CONFIG is cached in mmc_card->ext_csd.part_config and the
currently active partition in mmc_blk_data->part_curr. These caches do
not always reflect changes if the ioctl call modifies the
PARTITION_CONFIG registers, e.g. by changing BOOT_PARTITION_ENABLE.
Write the PARTITION_CONFIG value extracted from the ioctl call to the
cache and update the currently active partition accordingly. This
ensures that the user space cannot change the values behind the
kernel's back. The next call to mmc_blk_part_switch() will operate on
the data set by the ioctl and reflect the changes appropriately.
Signed-off-by: Bastian Stender <bst@xxxxxxxxxxxxxx>
Signed-off-by: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 4b09c7380e70..a2b9c2500c4c 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -72,6 +72,7 @@ MODULE_ALIAS("mmc:block");
#define MMC_BLK_TIMEOUT_MS (10 * 1000)
#define MMC_SANITIZE_REQ_TIMEOUT 240000
#define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
+#define MMC_EXTRACT_VALUE_FROM_ARG(x) ((x & 0x0000FF00) >> 8)
#define mmc_req_rel_wr(req) ((req->cmd_flags & REQ_FUA) && \
(rq_data_dir(req) == WRITE))
@@ -579,6 +580,24 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
return data.error;
}
+ /*
+ * Make sure the cache of the PARTITION_CONFIG register and
+ * PARTITION_ACCESS bits is updated in case the ioctl ext_csd write
+ * changed it successfully.
+ */
+ if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_PART_CONFIG) &&
+ (cmd.opcode == MMC_SWITCH)) {
+ struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
+ u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd.arg);
+
+ /*
+ * Update cache so the next mmc_blk_part_switch call operates
+ * on up-to-date data.
+ */
+ card->ext_csd.part_config = value;
+ main_md->part_curr = value & EXT_CSD_PART_CONFIG_ACC_MASK;
+ }
+
/*
* According to the SD specs, some commands require a delay after
* issuing the command.