On Thu, Apr 19, 2018 at 11:59:40AM +0300, Jani Nikula wrote: > Current CHV and BXT bspec says the dphy param register has four 8-bit > fields instead of the smaller VLV field widths. CHV bspec mentions the > register has changed since K0, but there's no indication of what exactly > changed. Lacking further details, change the field widths for all CHV > and later. K0 didn't happen, and looks like the linked HSD specifically says that this change was meant for K0. So I suspect this patch is wrong. The BXT HSD says planned for B0, but not sure if that actually happened either. On my VLV the reserved bits can't be set: intel_reg write 0x180000:0xb080 0xffffffff intel_reg write 0x180000:0xb880 0xffffffff intel_reg read 0x180000:0xb080 0x180000:0xb880 (0x00180000:0x0000b080): 0x3f1fff3f (0x00180000:0x0000b880): 0x3f1fff3f So presumably the same rmw trick could be used to check what how many bits we have on CHV/BXT. Also looks like the CHV spec was forked from VLV before someone fixed the prepare count to be 6 bits, which seems to be what my VLV actually has as well. Not the first time the VLV docs are more up to date than the CHV ones unfortunately. > > Define the max values based on the platform. Also define them based on > the register definitions instead of duplicating information. > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106130 > Cc: stable@xxxxxxxxxxxxxxx > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> > --- > drivers/gpu/drm/i915/i915_reg.h | 11 +++++++---- > drivers/gpu/drm/i915/intel_dsi_vbt.c | 31 +++++++++++++++++++------------ > 2 files changed, 26 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index fb106026a1f4..f4435a13b757 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -9547,14 +9547,17 @@ enum skl_power_gate { > #define _MIPIA_DPHY_PARAM (dev_priv->mipi_mmio_base + 0xb080) > #define _MIPIC_DPHY_PARAM (dev_priv->mipi_mmio_base + 0xb880) > #define MIPI_DPHY_PARAM(port) _MMIO_MIPI(port, _MIPIA_DPHY_PARAM, _MIPIC_DPHY_PARAM) > -#define EXIT_ZERO_COUNT_SHIFT 24 > #define EXIT_ZERO_COUNT_MASK (0x3f << 24) > -#define TRAIL_COUNT_SHIFT 16 > +#define EXIT_ZERO_COUNT_MASK_CHV (0xff << 24) > +#define EXIT_ZERO_COUNT_SHIFT 24 > #define TRAIL_COUNT_MASK (0x1f << 16) > -#define CLK_ZERO_COUNT_SHIFT 8 > +#define TRAIL_COUNT_MASK_CHV (0xff << 16) > +#define TRAIL_COUNT_SHIFT 16 > #define CLK_ZERO_COUNT_MASK (0xff << 8) > -#define PREPARE_COUNT_SHIFT 0 > +#define CLK_ZERO_COUNT_SHIFT 8 > #define PREPARE_COUNT_MASK (0x3f << 0) > +#define PREPARE_COUNT_MASK_CHV (0xff << 0) > +#define PREPARE_COUNT_SHIFT 0 > > /* bits 31:0 */ > #define _MIPIA_DBI_BW_CTRL (dev_priv->mipi_mmio_base + 0xb084) > diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c > index 4d6ffa7b3e7b..8d3dea693840 100644 > --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c > +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c > @@ -41,10 +41,17 @@ > #define MIPI_VIRTUAL_CHANNEL_SHIFT 1 > #define MIPI_PORT_SHIFT 3 > > -#define PREPARE_CNT_MAX 0x3F > -#define EXIT_ZERO_CNT_MAX 0x3F > -#define CLK_ZERO_CNT_MAX 0xFF > -#define TRAIL_CNT_MAX 0x1F > +#define EXIT_ZERO_CNT_MAX(dev_priv) \ > + ((IS_VALLEYVIEW(dev_priv) ? EXIT_ZERO_COUNT_MASK : EXIT_ZERO_COUNT_MASK_CHV) >> EXIT_ZERO_COUNT_SHIFT) > + > +#define TRAIL_CNT_MAX(dev_priv) \ > + ((IS_VALLEYVIEW(dev_priv) ? TRAIL_COUNT_MASK : TRAIL_COUNT_MASK_CHV) >> TRAIL_COUNT_SHIFT) > + > +#define CLK_ZERO_CNT_MAX(dev_priv) \ > + (CLK_ZERO_COUNT_MASK >> CLK_ZERO_COUNT_SHIFT) > + > +#define PREPARE_CNT_MAX(dev_priv) \ > + ((IS_VALLEYVIEW(dev_priv) ? PREPARE_COUNT_MASK : PREPARE_COUNT_MASK_CHV) >> PREPARE_COUNT_SHIFT) > > #define NS_KHZ_RATIO 1000000 > > @@ -647,9 +654,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) > /* prepare count */ > prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul); > > - if (prepare_cnt > PREPARE_CNT_MAX) { > + if (prepare_cnt > PREPARE_CNT_MAX(dev_priv)) { > DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt); > - prepare_cnt = PREPARE_CNT_MAX; > + prepare_cnt = PREPARE_CNT_MAX(dev_priv); > } > > /* exit zero count */ > @@ -667,9 +674,9 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) > if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num) > exit_zero_cnt += 1; > > - if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) { > + if (exit_zero_cnt > EXIT_ZERO_CNT_MAX(dev_priv)) { > DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt); > - exit_zero_cnt = EXIT_ZERO_CNT_MAX; > + exit_zero_cnt = EXIT_ZERO_CNT_MAX(dev_priv); > } > > /* clk zero count */ > @@ -677,18 +684,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) > (tclk_prepare_clkzero - ths_prepare_ns) > * ui_den, ui_num * mul); > > - if (clk_zero_cnt > CLK_ZERO_CNT_MAX) { > + if (clk_zero_cnt > CLK_ZERO_CNT_MAX(dev_priv)) { > DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt); > - clk_zero_cnt = CLK_ZERO_CNT_MAX; > + clk_zero_cnt = CLK_ZERO_CNT_MAX(dev_priv); > } > > /* trail count */ > tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail); > trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul); > > - if (trail_cnt > TRAIL_CNT_MAX) { > + if (trail_cnt > TRAIL_CNT_MAX(dev_priv)) { > DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt); > - trail_cnt = TRAIL_CNT_MAX; > + trail_cnt = TRAIL_CNT_MAX(dev_priv); > } > > /* B080 */ > -- > 2.11.0 -- Ville Syrjälä Intel