On Sun, Apr 15, 2018 at 3:12 PM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
> From: Fabio Estevam <fabio.estevam@xxxxxxx>
>
> imx6ul and imx7 report the following error:
>
> caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
> Protocol Size Error - A protocol has seen an error in size. When
> running RSA, pdb size N < (size of F) when no formatting is used; or
> pdb size N < (F + 11) when formatting is used.
>
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
> public_key_verify_signature+0x27c/0x2b0
>
> This error happens because the signature contains 257 bytes, including
> a leading zero as the first element.
>
> Fix the problem by stripping off the leading zero from input data
> before feeding it to the CAAM accelerator.
>
> Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Reported-by: Martin Townsend <mtownsend1973@xxxxxxxxx>
> Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
> ---
> Changes since v2:
> - Check if the lenght is zero after calling caam_rsa_drop_leading_zeros()
>
> drivers/crypto/caam/caampkc.c | 45 +++++++++++++++++++++++++++++++++++--------
> 1 file changed, 37 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
> index 7a897209..47467ff 100644
> --- a/drivers/crypto/caam/caampkc.c
> +++ b/drivers/crypto/caam/caampkc.c
> @@ -166,6 +166,14 @@ static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
> akcipher_request_complete(req, err);
> }
>
> +static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> +{
> + while (!**ptr && *nbytes) {
> + (*ptr)++;
> + (*nbytes)--;
> + }
> +}
> +
> static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
> size_t desclen)
> {
> @@ -178,7 +186,36 @@ static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
> int sgc;
> int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
> int src_nents, dst_nents;
> + const u8 *temp;
> + void *buffer;
> + size_t len;
> +
> + buffer = kzalloc(req->src_len, GFP_ATOMIC);
> + if (!buffer)
> + return ERR_PTR(-ENOMEM);
> +
> + sg_copy_to_buffer(req->src, sg_nents(req->src),
> + buffer, req->src_len);
> + temp = (u8 *)buffer;
> + len = req->src_len;
>
> + /*
> + * Check if the buffer contains leading zeros and if
> + * it does, drop the leading zeros
> + */
> + if (temp[0] == 0) {
> + caam_rsa_drop_leading_zeros(&temp, &len);
> + if (!len) {
> + kfree(buffer);
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + req->src_len = len;
> + sg_copy_from_buffer(req->src, sg_nents(req->src),
> + (void *)temp, req->src_len);
> + }
> +
> + kfree(buffer);
> src_nents = sg_nents_for_len(req->src, req->src_len);
> dst_nents = sg_nents_for_len(req->dst, req->dst_len);
>
> @@ -683,14 +720,6 @@ static void caam_rsa_free_key(struct caam_rsa_key *key)
> memset(key, 0, sizeof(*key));
> }
>
> -static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> -{
> - while (!**ptr && *nbytes) {
> - (*ptr)++;
> - (*nbytes)--;
> - }
> -}
> -
> /**
> * caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
> * dP, dQ and qInv could decode to less than corresponding p, q length, as the
> --
> 2.7.4
>
Hi Fabio,
just tried it and it works fine on my i.MX6UL board running linux-imx
4.9 (had to manually apply the patch as it doesn't have
caam_rsa_drop_leading_zeros) so a
Reviewed and Tested-By Martin Townsend
Many Thanks,
Martin.