Patch "vmxnet3: ensure that adapter is in proper state during force_close" has been added to the 3.18-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    vmxnet3: ensure that adapter is in proper state during force_close

to the 3.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     vmxnet3-ensure-that-adapter-is-in-proper-state-during-force_close.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From foo@baz Tue Apr 10 13:58:07 CEST 2018
From: Neil Horman <nhorman@xxxxxxxxxxxxx>
Date: Fri, 12 May 2017 12:00:01 -0400
Subject: vmxnet3: ensure that adapter is in proper state during force_close

From: Neil Horman <nhorman@xxxxxxxxxxxxx>


[ Upstream commit 1c4d5f51a812a82de97beee24f48ed05c65ebda5 ]

There are several paths in vmxnet3, where settings changes cause the
adapter to be brought down and back up (vmxnet3_set_ringparam among
them).  Should part of the reset operation fail, these paths call
vmxnet3_force_close, which enables all napi instances prior to calling
dev_close (with the expectation that vmxnet3_close will then properly
disable them again).  However, vmxnet3_force_close neglects to clear
VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close.  As a result
vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and
leaves all the napi instances in a enabled state while the device itself
is closed.  If a device in this state is activated again, napi_enable
will be called on already enabled napi_instances, leading to a BUG halt.

The fix is to simply enausre that the QUIESCED bit is cleared in
vmxnet3_force_close to allow quesence to be completed properly on close.

Signed-off-by: Neil Horman <nhorman@xxxxxxxxxxxxx>
CC: Shrikrishna Khare <skhare@xxxxxxxxxx>
CC: "VMware, Inc." <pv-drivers@xxxxxxxxxx>
CC: "David S. Miller" <davem@xxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/vmxnet3/vmxnet3_drv.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2648,6 +2648,11 @@ vmxnet3_force_close(struct vmxnet3_adapt
 	/* we need to enable NAPI, otherwise dev_close will deadlock */
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		napi_enable(&adapter->rx_queue[i].napi);
+	/*
+	 * Need to clear the quiesce bit to ensure that vmxnet3_close
+	 * can quiesce the device properly
+	 */
+	clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
 	dev_close(adapter->netdev);
 }
 


Patches currently in stable-queue which might be from nhorman@xxxxxxxxxxxxx are

queue-3.18/vmxnet3-ensure-that-adapter-is-in-proper-state-during-force_close.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]