On Tue, Apr 10, 2018 at 02:38:54PM +0900, Yoshihiro Shimoda wrote:
> This patch fixes an issue that reconnection is possible to fail
> because unexpected state handling happens by the irqs. To fix the issue,
> the driver disables the controller's irqs when disconnected.
>
> Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
> Cc: <stable@xxxxxxxxxxxxxxx> # v4.5+
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
>
> Remarks:
> - A new file in v2
>
> drivers/usb/gadget/udc/renesas_usb3.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
> index 0e70163..5caf78b 100644
> --- a/drivers/usb/gadget/udc/renesas_usb3.c
> +++ b/drivers/usb/gadget/udc/renesas_usb3.c
> @@ -623,6 +623,13 @@ static void usb3_disconnect(struct renesas_usb3 *usb3)
> usb3_usb2_pullup(usb3, 0);
> usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON);
> usb3_reset_epc(usb3);
> + usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM | USB_INT_1_B3_PLLWKUP |
> + USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE |
> + USB_INT_1_SPEED | USB_INT_1_B3_WRMRST |
> + USB_INT_1_B3_HOTRST | USB_INT_1_B2_SPND |
> + USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST);
> + usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON);
> + usb3_init_epc_registers(usb3);
>
> if (usb3->driver)
> usb3->driver->disconnect(&usb3->gadget);
> --
> 1.9.1
>
