From: Lin Yun Sheng <linyunsheng@xxxxxxxxxx> [ Upstream commit 7fe5b914313ff67d71cb2b5aa4b850e0884e75dd ] This patch fixes the phy loopback self_test failed issue. when Marvell Phy Module is loaded, it will powerdown fiber when doing phy loopback self test, which cause phy loopback self_test fail. Signed-off-by: Lin Yun Sheng <linyunsheng@xxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx> --- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c index 86a496d71995..ea5f7bd14b80 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c @@ -288,9 +288,15 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en) /* Force 1000M Link, Default is 0x0200 */ phy_write(phy_dev, 7, 0x20C); - phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); - /* Enable PHY loop-back */ + /* Powerup Fiber */ + phy_write(phy_dev, HNS_PHY_PAGE_REG, 1); + val = phy_read(phy_dev, COPPER_CONTROL_REG); + val &= ~PHY_POWER_DOWN; + phy_write(phy_dev, COPPER_CONTROL_REG, val); + + /* Enable Phy Loopback */ + phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); val = phy_read(phy_dev, COPPER_CONTROL_REG); val |= PHY_LOOP_BACK; val &= ~PHY_POWER_DOWN; @@ -299,6 +305,12 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en) phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA); phy_write(phy_dev, 1, 0x400); phy_write(phy_dev, 7, 0x200); + + phy_write(phy_dev, HNS_PHY_PAGE_REG, 1); + val = phy_read(phy_dev, COPPER_CONTROL_REG); + val |= PHY_POWER_DOWN; + phy_write(phy_dev, COPPER_CONTROL_REG, val); + phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); phy_write(phy_dev, 9, 0xF00); -- 2.15.1