From: Victor Gu <xigu@xxxxxxxxxxx>
When setting the PIO_ADDR_LS register during a configuration read, we
were properly passing the device number, function number and register
number, but not the bus number, causing issues when reading the
configuration of PCIe devices.
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Victor Gu <xigu@xxxxxxxxxxx>
Reviewed-by: Wilson Ding <dingwei@xxxxxxxxxxx>
Reviewed-by: Nadav Haklai <nadavh@xxxxxxxxxxx>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
---
Changes since v2:
- Drop PCIE_BDF() macro, since it's no longer used. Noticed by Bjorn
Helgaas.
---
drivers/pci/host/pci-aardvark.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index 9d7f9f1c6837..2d0f8148ae9b 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -172,8 +172,6 @@
#define PCIE_CONFIG_WR_TYPE0 0xa
#define PCIE_CONFIG_WR_TYPE1 0xb
-/* PCI_BDF shifts 8bit, so we need extra 4bit shift */
-#define PCIE_BDF(dev) (dev << 4)
#define PCIE_CONF_BUS(bus) (((bus) & 0xff) << 20)
#define PCIE_CONF_DEV(dev) (((dev) & 0x1f) << 15)
#define PCIE_CONF_FUNC(fun) (((fun) & 0x7) << 12)
@@ -465,7 +463,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
advk_writel(pcie, reg, PIO_CTRL);
/* Program the address registers */
- reg = PCIE_BDF(devfn) | PCIE_CONF_REG(where);
+ reg = PCIE_CONF_ADDR(bus->number, devfn, where);
advk_writel(pcie, reg, PIO_ADDR_LS);
advk_writel(pcie, 0, PIO_ADDR_MS);
--
2.14.3