This is a note to let you know that I've just added the patch titled
ppp: avoid loop in xmit recursion detection code
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ppp-avoid-loop-in-xmit-recursion-detection-code.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From foo@baz Wed Mar 28 20:16:33 CEST 2018
From: Guillaume Nault <g.nault@xxxxxxxxxxxx>
Date: Tue, 20 Mar 2018 16:49:26 +0100
Subject: ppp: avoid loop in xmit recursion detection code
From: Guillaume Nault <g.nault@xxxxxxxxxxxx>
[ Upstream commit 6d066734e9f09cdea4a3b9cb76136db3f29cfb02 ]
We already detect situations where a PPP channel sends packets back to
its upper PPP device. While this is enough to avoid deadlocking on xmit
locks, this doesn't prevent packets from looping between the channel
and the unit.
The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq
before checking for xmit recursion. Therefore, __ppp_xmit_process()
might dequeue a packet from ppp->file.xq and send it on the channel
which, in turn, loops it back on the unit. Then ppp_start_xmit()
queues the packet back to ppp->file.xq and __ppp_xmit_process() picks
it up and sends it again through the channel. Therefore, the packet
will loop between __ppp_xmit_process() and ppp_start_xmit() until some
other part of the xmit path drops it.
For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops
the packet after a few iterations. But PPTP reallocates the headroom
if necessary, letting the loop run and exhaust the machine resources
(as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109).
Fix this by letting __ppp_xmit_process() enqueue the skb to
ppp->file.xq, so that we can check for recursion before adding it to
the queue. Now ppp_xmit_process() can drop the packet when recursion is
detected.
__ppp_channel_push() is a bit special. It calls __ppp_xmit_process()
without having any actual packet to send. This is used by
ppp_output_wakeup() to re-enable transmission on the parent unit (for
implementations like ppp_async.c, where the .start_xmit() function
might not consume the skb, leaving it in ppp->xmit_pending and
disabling transmission).
Therefore, __ppp_xmit_process() needs to handle the case where skb is
NULL, dequeuing as many packets as possible from ppp->file.xq.
Reported-by: xu heng <xuheng333@xxxxxxxx>
Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit")
Signed-off-by: Guillaume Nault <g.nault@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ppp/ppp_generic.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -255,7 +255,7 @@ struct ppp_net {
/* Prototypes. */
static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf,
struct file *file, unsigned int cmd, unsigned long arg);
-static void ppp_xmit_process(struct ppp *ppp);
+static void ppp_xmit_process(struct ppp *ppp, struct sk_buff *skb);
static void ppp_send_frame(struct ppp *ppp, struct sk_buff *skb);
static void ppp_push(struct ppp *ppp);
static void ppp_channel_push(struct channel *pch);
@@ -511,13 +511,12 @@ static ssize_t ppp_write(struct file *fi
goto out;
}
- skb_queue_tail(&pf->xq, skb);
-
switch (pf->kind) {
case INTERFACE:
- ppp_xmit_process(PF_TO_PPP(pf));
+ ppp_xmit_process(PF_TO_PPP(pf), skb);
break;
case CHANNEL:
+ skb_queue_tail(&pf->xq, skb);
ppp_channel_push(PF_TO_CHANNEL(pf));
break;
}
@@ -1261,8 +1260,8 @@ ppp_start_xmit(struct sk_buff *skb, stru
put_unaligned_be16(proto, pp);
skb_scrub_packet(skb, !net_eq(ppp->ppp_net, dev_net(dev)));
- skb_queue_tail(&ppp->file.xq, skb);
- ppp_xmit_process(ppp);
+ ppp_xmit_process(ppp, skb);
+
return NETDEV_TX_OK;
outf:
@@ -1416,13 +1415,14 @@ static void ppp_setup(struct net_device
*/
/* Called to do any work queued up on the transmit side that can now be done */
-static void __ppp_xmit_process(struct ppp *ppp)
+static void __ppp_xmit_process(struct ppp *ppp, struct sk_buff *skb)
{
- struct sk_buff *skb;
-
ppp_xmit_lock(ppp);
if (!ppp->closing) {
ppp_push(ppp);
+
+ if (skb)
+ skb_queue_tail(&ppp->file.xq, skb);
while (!ppp->xmit_pending &&
(skb = skb_dequeue(&ppp->file.xq)))
ppp_send_frame(ppp, skb);
@@ -1436,7 +1436,7 @@ static void __ppp_xmit_process(struct pp
ppp_xmit_unlock(ppp);
}
-static void ppp_xmit_process(struct ppp *ppp)
+static void ppp_xmit_process(struct ppp *ppp, struct sk_buff *skb)
{
local_bh_disable();
@@ -1444,7 +1444,7 @@ static void ppp_xmit_process(struct ppp
goto err;
(*this_cpu_ptr(ppp->xmit_recursion))++;
- __ppp_xmit_process(ppp);
+ __ppp_xmit_process(ppp, skb);
(*this_cpu_ptr(ppp->xmit_recursion))--;
local_bh_enable();
@@ -1454,6 +1454,8 @@ static void ppp_xmit_process(struct ppp
err:
local_bh_enable();
+ kfree_skb(skb);
+
if (net_ratelimit())
netdev_err(ppp->dev, "recursion detected\n");
}
@@ -1938,7 +1940,7 @@ static void __ppp_channel_push(struct ch
if (skb_queue_empty(&pch->file.xq)) {
ppp = pch->ppp;
if (ppp)
- __ppp_xmit_process(ppp);
+ __ppp_xmit_process(ppp, NULL);
}
}
Patches currently in stable-queue which might be from g.nault@xxxxxxxxxxxx are
queue-4.9/ppp-avoid-loop-in-xmit-recursion-detection-code.patch
queue-4.9/l2tp-do-not-accept-arbitrary-sockets.patch