4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
commit 49012d1bf5f78782d398adb984a080a88ba42965 upstream.
ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove
the '~' in the definition to fix ANA setup.
Note that this commit fixes a long standing bug preventing one from
using an HDMI display if it's plugged after the FW has booted Linux.
This is because PLLH is used by the HDMI encoder to generate the pixel
clock.
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Reviewed-by: Eric Anholt <eric@xxxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/clk/bcm/clk-bcm2835.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -479,17 +479,17 @@ struct bcm2835_pll_ana_bits {
static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
.mask0 = 0,
.set0 = 0,
- .mask1 = (u32)~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
+ .mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK,
.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
- .mask3 = (u32)~A2W_PLL_KA_MASK,
+ .mask3 = A2W_PLL_KA_MASK,
.set3 = (2 << A2W_PLL_KA_SHIFT),
.fb_prediv_mask = BIT(14),
};
static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
- .mask0 = (u32)~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
+ .mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK,
.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
- .mask1 = (u32)~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
+ .mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK,
.set1 = (6 << A2W_PLLH_KP_SHIFT),
.mask3 = 0,
.set3 = 0,