This is a note to let you know that I've just added the patch titled
iio: st_pressure: st_accel: pass correct platform data to init
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
iio-st_pressure-st_accel-pass-correct-platform-data-to-init.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 8b438686a001db64c21782d04ef68111e53c45d9 Mon Sep 17 00:00:00 2001
From: Michael Nosthoff <committed@xxxxxxxx>
Date: Fri, 9 Mar 2018 10:02:45 +0100
Subject: iio: st_pressure: st_accel: pass correct platform data to init
From: Michael Nosthoff <committed@xxxxxxxx>
commit 8b438686a001db64c21782d04ef68111e53c45d9 upstream.
Commit 7383d44b added a pointer pdata which get set to the default
platform_data when non was defined in the device. But it did not
pass this pointer to the st_sensors_init_sensor call but still
used the maybe uninitialized platform_data from dev.
This breaks initialization when no platform_data is given and
the optional st,drdy-int-pin devicetree option is not set.
This commit fixes this.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly")
Signed-off-by: Michael Nosthoff <committed@xxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/accel/st_accel_core.c | 2 +-
drivers/iio/pressure/st_pressure_core.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -657,7 +657,7 @@ int st_accel_common_probe(struct iio_dev
if (!pdata)
pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
- err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+ err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
return err;
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -469,7 +469,7 @@ int st_press_common_probe(struct iio_dev
if (!pdata && press_data->sensor_settings->drdy_irq.addr)
pdata = (struct st_sensors_platform_data *)&default_press_pdata;
- err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
+ err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
return err;
Patches currently in stable-queue which might be from committed@xxxxxxxx are
queue-4.4/iio-st_pressure-st_accel-pass-correct-platform-data-to-init.patch