On Tue, Mar 20, 2018 at 04:09:38PM +0000, Gabriel Matni wrote:
> From: Gabriel Matni <gabriel.matni@xxxxxxxx>
>
> Fixes missing characters on kernel console at low baud rates (i.e.9600).
> The driver should poll TX_RDY or TX_FIFO_EMP instead of TX_EMP to ensure
> that the transmitter holding register (THR) is ready to receive a new byte.
>
> TX_EMP tells us when it is possible to send a break sequence via
> SND_BRK_SEQ. While this also indicates that both the THR and the TSR are
> empty, it does not guarantee that a new byte can be written just yet.
>
> Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
> Reviewed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> Acked-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
> Signed-off-by: Gabriel Matni <gabriel.matni@xxxxxxxx>
> ---
> Changes since v2:
> - use one line for the "Fixes" entry
> - removed trailing space between Signed-off-by entry and ---
> - start using versioning, previous fixes in v1
>
> Changes since v1:
> - patch was corrupt, could not be applied
> - fixed line indent
> ---
> drivers/tty/serial/mvebu-uart.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
> index a100e98259d7..f0df0640208e 100644
> --- a/drivers/tty/serial/mvebu-uart.c
> +++ b/drivers/tty/serial/mvebu-uart.c
> @@ -618,7 +618,7 @@ static void wait_for_xmitr(struct uart_port *port)
> u32 val;
>
> readl_poll_timeout_atomic(port->membase + UART_STAT, val,
> - (val & STAT_TX_EMP), 1, 10000);
> + (val & STAT_TX_RDY(port)), 1, 10000);
> }
>
> static void mvebu_uart_console_putchar(struct uart_port *port, int ch)
> --
> 2.7.4
>
>
> > -----Original Message-----
> > From: gregkh@xxxxxxxxxxxxxxxxxxx <gregkh@xxxxxxxxxxxxxxxxxxx>
> > Sent: March 20, 2018 5:32 AM
> > To: Gabriel Matni <gabriel.matni@xxxxxxxx>
> > Cc: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>; linux-
> > serial@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > stable@xxxxxxxxxxxxxxx; Grégory Clement <gregory.clement@xxxxxxxxxxx>;
> > Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
> > Subject: Re: [PATCH] serial: mvebu-uart: fix tx lost characters
<snip>
What is all of this below the patch for?
Please clean up and send this properly, in a clean email, with no "Re:"
on the subject line, as a new patch/email.
thanks,
greg k-h