In order to enable a PLL, not only the PLL has to be powered up and
locked, but you also have to de-assert the reset signal. The last part
was missing. Add it so PLLs that were not enabled by the FW/bootloader
can be enabled from Linux.
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
---
Changes in v2:
- simplify bcm2835_pll_off()
---
drivers/clk/bcm/clk-bcm2835.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index a07f6451694a..fa0d5c8611a0 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -602,9 +602,7 @@ static void bcm2835_pll_off(struct clk_hw *hw)
const struct bcm2835_pll_data *data = pll->data;
spin_lock(&cprman->regs_lock);
- cprman_write(cprman, data->cm_ctrl_reg,
- cprman_read(cprman, data->cm_ctrl_reg) |
- CM_PLL_ANARST);
+ cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
cprman_write(cprman, data->a2w_ctrl_reg,
cprman_read(cprman, data->a2w_ctrl_reg) |
A2W_PLL_CTRL_PWRDN);
@@ -640,6 +638,10 @@ static int bcm2835_pll_on(struct clk_hw *hw)
cpu_relax();
}
+ cprman_write(cprman, data->a2w_ctrl_reg,
+ cprman_read(cprman, data->a2w_ctrl_reg) |
+ A2W_PLL_CTRL_PRST_DISABLE);
+
return 0;
}
--
2.14.1