As per the IFC hardware manual, Most significant 2 bytes in
nand_fsr register are the outcome of NAND READ STATUS command.
So status value need to be shifted and aligned as per the nand
framework requirement.
Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller")
Cc: stable@xxxxxxxxxxxxxxx # v3.18+
Signed-off-by: Jagdish Gediya <jagdish.gediya@xxxxxxx>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@xxxxxxx>
---
Changes for v2: Incorporated comments from Boris Brezillon
- Added fixes tag
Changes for v3: Incorporated comments from Boris Brezillon
drivers/mtd/nand/fsl_ifc_nand.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 9390cbd..16104ca 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -629,6 +629,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
u32 nand_fsr;
+ int status;
/* Use READ_STATUS command, but wait for the device to be ready */
ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
@@ -643,12 +644,12 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
fsl_ifc_run_command(mtd);
nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr);
-
+ status = nand_fsr >> 24;
/*
* The chip always seems to report that it is
* write-protected, even when it is not.
*/
- return nand_fsr | NAND_STATUS_WP;
+ return status | NAND_STATUS_WP;
}
/*
--
1.9.1