From: Hans de Goede <hdegoede@xxxxxxxxxx> [ Upstream commit 9291c65b01d1c67ebd56644cb19317ad665c44b3 ] On some systems, some PCB traces attached to GpioInts are routed in such a way that they pick up enough interference to constantly (many times per second) trigger. Enabling glitch-filtering fixes this. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Acked-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx> --- drivers/pinctrl/intel/pinctrl-baytrail.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index 0f3a02495aeb..beeb7cbb5015 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -46,6 +46,9 @@ #define BYT_TRIG_POS BIT(25) #define BYT_TRIG_LVL BIT(24) #define BYT_DEBOUNCE_EN BIT(20) +#define BYT_GLITCH_FILTER_EN BIT(19) +#define BYT_GLITCH_F_SLOW_CLK BIT(17) +#define BYT_GLITCH_F_FAST_CLK BIT(16) #define BYT_PULL_STR_SHIFT 9 #define BYT_PULL_STR_MASK (3 << BYT_PULL_STR_SHIFT) #define BYT_PULL_STR_2K (0 << BYT_PULL_STR_SHIFT) @@ -1579,6 +1582,9 @@ static int byt_irq_type(struct irq_data *d, unsigned int type) */ value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL); + /* Enable glitch filtering */ + value |= BYT_GLITCH_FILTER_EN | BYT_GLITCH_F_SLOW_CLK | + BYT_GLITCH_F_FAST_CLK; writel(value, reg); -- 2.14.1