[PATCH AUTOSEL for 4.4 104/167] cxgb4: FW upgrade fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arjun Vynipadath <arjun@xxxxxxxxxxx>

[ Upstream commit 26747211486c5bc7dd014c3caab206576e00c0d0 ]

Disable FW_OK flag while flashing Firmware. This will help to fix any
potential mailbox timeouts during Firmware flash.

Grab new devlog parameters after Firmware restart. When we FLASH new
Firmware onto an adapter, the new Firmware may have the Firmware Device Log
located at a different memory address or have a different size for it.

Signed-off-by: Arjun Vynipadath <arjun@xxxxxxxxxxx>
Signed-off-by: Casey Leedom <leedom@xxxxxxxxxxx>
Signed-off-by: Ganesh Goudar <ganeshgr@xxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index cf61a5869c6e..a1b9d6c74309 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -6076,13 +6076,18 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
 	if (!t4_fw_matches_chip(adap, fw_hdr))
 		return -EINVAL;
 
+	/* Disable FW_OK flag so that mbox commands with FW_OK flag set
+	 * wont be sent when we are flashing FW.
+	 */
+	adap->flags &= ~FW_OK;
+
 	ret = t4_fw_halt(adap, mbox, force);
 	if (ret < 0 && !force)
-		return ret;
+		goto out;
 
 	ret = t4_load_fw(adap, fw_data, size);
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	/*
 	 * Older versions of the firmware don't understand the new
@@ -6093,7 +6098,17 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
 	 * its header flags to see if it advertises the capability.
 	 */
 	reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0);
-	return t4_fw_restart(adap, mbox, reset);
+	ret = t4_fw_restart(adap, mbox, reset);
+
+	/* Grab potentially new Firmware Device Log parameters so we can see
+	 * how healthy the new Firmware is.  It's okay to contact the new
+	 * Firmware for these parameters even though, as far as it's
+	 * concerned, we've never said "HELLO" to it ...
+	 */
+	(void)t4_init_devlog_params(adap);
+out:
+	adap->flags |= FW_OK;
+	return ret;
 }
 
 /**
-- 
2.14.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]