From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> [ Upstream commit aa18c4b6e0e39bfb00af48734ec24bc189ac9909 ] In the ene_usb6250 sub-driver for usb-storage, the SCSI residue is not reported correctly. The residue is initialized to 0, but this value is overwritten whenever the driver sends firmware to the card reader before performing the current command. As a result, a valid READ or WRITE operation appears to have failed, causing the SCSI core to retry the command multiple times and eventually fail. This patch fixes the problem by resetting the SCSI residue to 0 after sending firmware to the device. Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Reported-and-tested-by: Andreas Hartmann <andihartmann@xxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx> --- drivers/usb/storage/ene_ub6250.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index eebfa09bccc1..962bb6376b0c 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1953,6 +1953,8 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag) bcb->CDB[0] = 0xEF; result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0); + if (us->srb != NULL) + scsi_set_resid(us->srb, 0); info->BIN_FLAG = flag; kfree(buf); -- 2.14.1