This is a note to let you know that I've just added the patch titled
ARM: dts: exynos: Correct Trats2 panel reset line
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-exynos-correct-trats2-panel-reset-line.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From foo@baz Sun Mar 18 16:55:33 CET 2018
From: Simon Shields <simon@xxxxxxxxxxxxx>
Date: Tue, 21 Nov 2017 22:24:24 +1100
Subject: ARM: dts: exynos: Correct Trats2 panel reset line
From: Simon Shields <simon@xxxxxxxxxxxxx>
[ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ]
Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used
on early revisions of the board.
Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node")
Signed-off-by: Simon Shields <simon@xxxxxxxxxxxxx>
Acked-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -408,7 +408,7 @@
reg = <0>;
vdd3-supply = <&lcd_vdd3_reg>;
vci-supply = <&ldo25_reg>;
- reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
Patches currently in stable-queue which might be from simon@xxxxxxxxxxxxx are
queue-4.9/arm-dts-exynos-correct-trats2-panel-reset-line.patch