[PATCH stable-4.15] nvme: fix subsystem multiple controllers support check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Israel Rukshin <israelr@xxxxxxxxxxxx>

Commit b837b28394fb76993c28bb242db7061ee0417da6 upstream.

There is a problem when another module (e.g. nvmet) takes a reference on
the nvme block device and the physical nvme drive is removed.  In that
case nvme_free_ctrl() will not be called and the controller state will be
"deleting" or "dead" unless nvmet module releases the block device.
Later on, the same nvme drive probes back and nvme_init_subsystem() will
be called and fail due to duplicate subnqn (if the nvme device doesn't
support subsystem with multiple controllers). This will cause a probe
failure.  This commit changes the check of multiple controllers support
at nvme_init_subsystem() by not counting all the controllers at "dead" or
"deleting" state (this is safe because controllers at this state will
never be active again).

Fixes: ab9e00cc72fa ("nvme: track subsystems")
Reviewed-by: Max Gurtovoy <maxg@xxxxxxxxxxxx>
Signed-off-by: Israel Rukshin <israelr@xxxxxxxxxxxx>
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Keith Busch <keith.busch@xxxxxxxxx>
---
 drivers/nvme/host/core.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 3551fbd6fe41..935593032123 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2052,6 +2052,22 @@ static const struct attribute_group *nvme_subsys_attrs_groups[] = {
 	NULL,
 };
 
+static int nvme_active_ctrls(struct nvme_subsystem *subsys)
+{
+	int count = 0;
+	struct nvme_ctrl *ctrl;
+
+	mutex_lock(&subsys->lock);
+	list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry) {
+		if (ctrl->state != NVME_CTRL_DELETING &&
+		    ctrl->state != NVME_CTRL_DEAD)
+			count++;
+	}
+	mutex_unlock(&subsys->lock);
+
+	return count;
+}
+
 static int nvme_init_subsystem(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 {
 	struct nvme_subsystem *subsys, *found;
@@ -2090,7 +2106,7 @@ static int nvme_init_subsystem(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 		 * Verify that the subsystem actually supports multiple
 		 * controllers, else bail out.
 		 */
-		if (!(id->cmic & (1 << 1))) {
+		if (nvme_active_ctrls(found) && !(id->cmic & (1 << 1))) {
 			dev_err(ctrl->device,
 				"ignoring ctrl due to duplicate subnqn (%s).\n",
 				found->subnqn);
-- 
2.14.3




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]