Patch "typec: tcpm: fusb302: Resolve out of order messaging events" has been added to the 4.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    typec: tcpm: fusb302: Resolve out of order messaging events

to the 4.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     typec-tcpm-fusb302-resolve-out-of-order-messaging-events.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From foo@baz Fri Mar 16 15:11:07 CET 2018
From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
Date: Tue, 21 Nov 2017 14:12:12 +0000
Subject: typec: tcpm: fusb302: Resolve out of order messaging events

From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>


[ Upstream commit ab69f61321140ff632d560775bc226259a78dfa2 ]

The expectation in the FUSB302 driver is that a TX_SUCCESS event
should occur after a message has been sent, but before a GCRCSENT
event is raised to indicate successful receipt of a message from
the partner. However in some circumstances it is possible to see
the hardware raise a GCRCSENT event before a TX_SUCCESS event
is raised. The upshot of this is that the GCRCSENT handling portion
of code ends up reporting the GoodCRC message to TCPM because the
TX_SUCCESS event hasn't yet arrived to trigger a consumption of it.
When TX_SUCCESS is then raised by the chip it ends up consuming the
actual message that was meant for TCPM, and this incorrect sequence
results in a hard reset from TCPM.

To avoid this problem, this commit updates the message reading
code to check whether a GoodCRC message was received or not. Based
on this check it will either report that the previous transmission
has completed or it will pass the msg data to TCPM for futher
processing. This way the incorrect ordering of the events no longer
matters.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/typec/fusb302/fusb302.c |   21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

--- a/drivers/usb/typec/fusb302/fusb302.c
+++ b/drivers/usb/typec/fusb302/fusb302.c
@@ -1543,6 +1543,21 @@ static int fusb302_pd_read_message(struc
 	fusb302_log(chip, "PD message header: %x", msg->header);
 	fusb302_log(chip, "PD message len: %d", len);
 
+	/*
+	 * Check if we've read off a GoodCRC message. If so then indicate to
+	 * TCPM that the previous transmission has completed. Otherwise we pass
+	 * the received message over to TCPM for processing.
+	 *
+	 * We make this check here instead of basing the reporting decision on
+	 * the IRQ event type, as it's possible for the chip to report the
+	 * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need
+	 * to check the message type to ensure correct reporting to TCPM.
+	 */
+	if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
+		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
+	else
+		tcpm_pd_receive(chip->tcpm_port, msg);
+
 	return ret;
 }
 
@@ -1650,13 +1665,12 @@ static irqreturn_t fusb302_irq_intn(int
 
 	if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) {
 		fusb302_log(chip, "IRQ: PD tx success");
-		/* read out the received good CRC */
 		ret = fusb302_pd_read_message(chip, &pd_msg);
 		if (ret < 0) {
-			fusb302_log(chip, "cannot read in GCRC, ret=%d", ret);
+			fusb302_log(chip,
+				    "cannot read in PD message, ret=%d", ret);
 			goto done;
 		}
-		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
 	}
 
 	if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) {
@@ -1677,7 +1691,6 @@ static irqreturn_t fusb302_irq_intn(int
 				    "cannot read in PD message, ret=%d", ret);
 			goto done;
 		}
-		tcpm_pd_receive(chip->tcpm_port, &pd_msg);
 	}
 done:
 	mutex_unlock(&chip->lock);


Patches currently in stable-queue which might be from Adam.Thomson.Opensource@xxxxxxxxxxx are

queue-4.15/typec-tcpm-fusb302-resolve-out-of-order-messaging-events.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]