Patch "arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset" has been added to the 4.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset

to the 4.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-renesas-salvator-common-add-ethernetavb-phy-reset.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From foo@baz Fri Mar 16 15:11:08 CET 2018
From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Date: Mon, 4 Dec 2017 11:34:51 +0100
Subject: arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset

From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>


[ Upstream commit f5bbcd533a9d1af97b8a0862a421bb8455f1bf6d ]

Describe the GPIO used to reset the Ethernet PHY for EthernetAVB.
This allows the driver to reset the PHY during probe and after system
resume.

This fixes Ethernet operation after resume from s2ram on Salvator-XS,
where the enable pin of the regulator providing PHY power is connected
to PRESETn, and PSCI powers down the SoC during system suspend.

On Salvator-X, the enable pin is always pulled high, but the driver may
still need to reset the PHY if this wasn't done by the bootloader
before.

Inspired by patches in the BSP for the individual Salvator-X/XS boards
by Kazuya Mizuguchi.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -263,6 +263,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
 


Patches currently in stable-queue which might be from geert+renesas@xxxxxxxxx are

queue-4.15/clk-renesas-r8a77970-add-lvds-clock.patch
queue-4.15/serial-sh-sci-prevent-lockup-on-full-tty-buffers.patch
queue-4.15/pinctrl-sh-pfc-r8a7795-es1-fix-mod_sel1-bit-to-0x3-when-using-stp_isen_1_d.patch
queue-4.15/arm64-dts-renesas-salvator-common-add-ethernetavb-phy-reset.patch
queue-4.15/pinctrl-sh-pfc-r8a7791-add-can_clk-function.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]