3.2.101-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Paul Bolle <pebolle@xxxxxxxxxx> commit bb263e18f481199a04f7aab9454c18cd3dbdb218 upstream. Building atp.o triggers this GCC warning: drivers/net/ethernet/realtek/atp.c: In function ‘set_rx_mode’: drivers/net/ethernet/realtek/atp.c:871:26: warning: ‘mc_filter[0]’ may be used uninitialized in this function [-Wuninitialized] GCC is correct. In promiscuous mode 'mc_filter' will be used uninitialized in set_rx_mode_8012(), which is apparently inlined into set_rx_mode(). But it turns out set_rx_mode_8012() will never be called, since net_local.chip_type will always be RTL8002. So we can just remove set_rx_mode_8012() and do some related cleanups. Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx> --- drivers/net/ethernet/realtek/atp.c | 58 ++------------------------------------ drivers/net/ethernet/realtek/atp.h | 2 -- 2 files changed, 2 insertions(+), 58 deletions(-) --- a/drivers/net/ethernet/realtek/atp.c +++ b/drivers/net/ethernet/realtek/atp.c @@ -176,8 +176,7 @@ struct net_local { unsigned int tx_unit_busy:1; unsigned char re_tx, /* Number of packet retransmissions. */ addr_mode, /* Current Rx filter e.g. promiscuous, etc. */ - pac_cnt_in_tx_buf, - chip_type; + pac_cnt_in_tx_buf; }; /* This code, written by wwc@xxxxxxxxx, resets the adapter every @@ -340,7 +339,6 @@ static int __init atp_probe1(long ioaddr write_reg_high(ioaddr, CMR1, CMR1h_RESET | CMR1h_MUX); lp = netdev_priv(dev); - lp->chip_type = RTL8002; lp->addr_mode = CMR2h_Normal; spin_lock_init(&lp->lock); @@ -853,7 +851,7 @@ net_close(struct net_device *dev) * Set or clear the multicast filter for this adapter. */ -static void set_rx_mode_8002(struct net_device *dev) +static void set_rx_mode(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); long ioaddr = dev->base_addr; @@ -865,58 +863,6 @@ static void set_rx_mode_8002(struct net_ write_reg_high(ioaddr, CMR2, lp->addr_mode); } -static void set_rx_mode_8012(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - long ioaddr = dev->base_addr; - unsigned char new_mode, mc_filter[8]; /* Multicast hash filter */ - int i; - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - new_mode = CMR2h_PROMISC; - } else if ((netdev_mc_count(dev) > 1000) || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter perfectly -- accept all multicasts. */ - memset(mc_filter, 0xff, sizeof(mc_filter)); - new_mode = CMR2h_Normal; - } else { - struct netdev_hw_addr *ha; - - memset(mc_filter, 0, sizeof(mc_filter)); - netdev_for_each_mc_addr(ha, dev) { - int filterbit = ether_crc_le(ETH_ALEN, ha->addr) & 0x3f; - mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); - } - new_mode = CMR2h_Normal; - } - lp->addr_mode = new_mode; - write_reg(ioaddr, CMR2, CMR2_IRQOUT | 0x04); /* Switch to page 1. */ - for (i = 0; i < 8; i++) - write_reg_byte(ioaddr, i, mc_filter[i]); - if (net_debug > 2 || 1) { - lp->addr_mode = 1; - printk(KERN_DEBUG "%s: Mode %d, setting multicast filter to", - dev->name, lp->addr_mode); - for (i = 0; i < 8; i++) - printk(" %2.2x", mc_filter[i]); - printk(".\n"); - } - - write_reg_high(ioaddr, CMR2, lp->addr_mode); - write_reg(ioaddr, CMR2, CMR2_IRQOUT); /* Switch back to page 0 */ -} - -static void set_rx_mode(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - if (lp->chip_type == RTL8002) - return set_rx_mode_8002(dev); - else - return set_rx_mode_8012(dev); -} - - static int __init atp_init_module(void) { if (debug) /* Emit version even if no cards detected. */ printk(KERN_INFO "%s", version); --- a/drivers/net/ethernet/realtek/atp.h +++ b/drivers/net/ethernet/realtek/atp.h @@ -16,8 +16,6 @@ struct rx_header { #define PAR_STATUS 1 #define PAR_CONTROL 2 -enum chip_type { RTL8002, RTL8012 }; - #define Ctrl_LNibRead 0x08 /* LP_PSELECP */ #define Ctrl_HNibRead 0 #define Ctrl_LNibWrite 0x08 /* LP_PSELECP */