Patch "can: flexcan: fix flexcan_chip_start() on imx6" has been added to the 3.10-stable tree

[<gregkh@xxxxxxxxxxxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    can: flexcan: fix flexcan_chip_start() on imx6

to the 3.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     can-flexcan-fix-flexcan_chip_start-on-imx6.patch
and it can be found in the queue-3.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 0d1862ea1a5bb876cf05555a7307080cb75bf379 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Date: Fri, 27 Sep 2013 12:15:05 +0200
Subject: can: flexcan: fix flexcan_chip_start() on imx6

From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>

commit 0d1862ea1a5bb876cf05555a7307080cb75bf379 upstream.

In the flexcan_chip_start() function first the flexcan core is going through
the soft reset sequence, then the RX FIFO is enabled.

With the hardware is put into FIFO mode, message buffers 1...7 are reserved by
the FIFO engine. The remaining message buffers are in reset default values.
This patch removes the bogus initialization of the message buffers, as it
causes an imprecise external abort on imx6.

Reported-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
Tested-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/can/flexcan.c |   12 ------------
 1 file changed, 12 deletions(-)

--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -711,7 +711,6 @@ static int flexcan_chip_start(struct net
 {
 	struct flexcan_priv *priv = netdev_priv(dev);
 	struct flexcan_regs __iomem *regs = priv->base;
-	unsigned int i;
 	int err;
 	u32 reg_mcr, reg_ctrl;
 
@@ -781,17 +780,6 @@ static int flexcan_chip_start(struct net
 	netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
 	flexcan_write(reg_ctrl, &regs->ctrl);
 
-	for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) {
-		flexcan_write(0, &regs->cantxfg[i].can_ctrl);
-		flexcan_write(0, &regs->cantxfg[i].can_id);
-		flexcan_write(0, &regs->cantxfg[i].data[0]);
-		flexcan_write(0, &regs->cantxfg[i].data[1]);
-
-		/* put MB into rx queue */
-		flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
-			&regs->cantxfg[i].can_ctrl);
-	}
-
 	/* acceptance mask/acceptance code (accept everything) */
 	flexcan_write(0x0, &regs->rxgmask);
 	flexcan_write(0x0, &regs->rx14mask);


Patches currently in stable-queue which might be from mkl@xxxxxxxxxxxxxx are

queue-3.10/can-flexcan-fix-flexcan_chip_start-on-imx6.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html