Patch "scsi: mpt3sas: fix oops in error handlers after shutdown/unload" has been added to the 4.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    scsi: mpt3sas: fix oops in error handlers after shutdown/unload

to the 4.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     scsi-mpt3sas-fix-oops-in-error-handlers-after-shutdown-unload.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 9ff549ffb4fb4cc9a4b24d1de9dc3e68287797c4 Mon Sep 17 00:00:00 2001
From: Mauricio Faria de Oliveira <mauricfo@xxxxxxxxxxxxxxxxxx>
Date: Fri, 16 Feb 2018 20:39:57 -0200
Subject: scsi: mpt3sas: fix oops in error handlers after shutdown/unload

From: Mauricio Faria de Oliveira <mauricfo@xxxxxxxxxxxxxxxxxx>

commit 9ff549ffb4fb4cc9a4b24d1de9dc3e68287797c4 upstream.

This patch adds checks for 'ioc->remove_host' in the SCSI error handlers, so
not to access pointers/resources potentially freed in the PCI shutdown/module
unload path.  The error handlers may be invoked after shutdown/unload,
depending on other components.

This problem was observed with kexec on a system with a mpt3sas based adapter
and an infiniband adapter which takes long enough to shutdown:

The mpt3sas driver finished shutting down / disabled interrupt handling, thus
some commands have not finished and timed out.

Since the system was still running (waiting for the infiniband adapter to
shutdown), the scsi error handler for task abort of mpt3sas was invoked, and
hit an oops -- either in scsih_abort() because 'ioc->scsi_lookup' was NULL
without commit dbec4c9040ed ("scsi: mpt3sas: lockless command submission"), or
later up in scsih_host_reset() (with or without that commit), because it
eventually called mpt3sas_base_get_iocstate().

After the above commit, the oops in scsih_abort() does not occur anymore
(_scsih_scsi_lookup_find_by_scmd() is no longer called), but that commit is
too big and out of the scope of linux-stable, where this patch might help, so
still go for the changes.

Also, this might help to prevent similar errors in the future, in case code
changes and possibly tries to access freed stuff.

Note the fix in scsih_host_reset() is still important anyway.

Signed-off-by: Mauricio Faria de Oliveira <mauricfo@xxxxxxxxxxxxxxxxxx>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2998,7 +2998,8 @@ scsih_abort(struct scsi_cmnd *scmd)
 	_scsih_tm_display_info(ioc, scmd);
 
 	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
 		sdev_printk(KERN_INFO, scmd->device,
 			"device been deleted! scmd(%p)\n", scmd);
 		scmd->result = DID_NO_CONNECT << 16;
@@ -3060,7 +3061,8 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 	_scsih_tm_display_info(ioc, scmd);
 
 	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
 		sdev_printk(KERN_INFO, scmd->device,
 			"device been deleted! scmd(%p)\n", scmd);
 		scmd->result = DID_NO_CONNECT << 16;
@@ -3122,7 +3124,8 @@ scsih_target_reset(struct scsi_cmnd *scm
 	_scsih_tm_display_info(ioc, scmd);
 
 	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
 		starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n",
 			scmd);
 		scmd->result = DID_NO_CONNECT << 16;
@@ -3179,7 +3182,7 @@ scsih_host_reset(struct scsi_cmnd *scmd)
 	    ioc->name, scmd);
 	scsi_print_command(scmd);
 
-	if (ioc->is_driver_loading) {
+	if (ioc->is_driver_loading || ioc->remove_host) {
 		pr_info(MPT3SAS_FMT "Blocking the host reset\n",
 		    ioc->name);
 		r = FAILED;


Patches currently in stable-queue which might be from mauricfo@xxxxxxxxxxxxxxxxxx are

queue-4.15/scsi-mpt3sas-wait-for-and-flush-running-commands-on-shutdown-unload.patch
queue-4.15/scsi-mpt3sas-fix-oops-in-error-handlers-after-shutdown-unload.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]