From: Brian Norris <briannorris@xxxxxxxxxxxx>
[ Upstream commit 5c9d8c4f6b8168738a26bcf288516cc3a0886810 ]
We generally leave the GPIO clock disabled, unless an interrupt is
requested or we're accessing IO registers. We forgot to do this for the
->get_direction() callback, which means we can sometimes [1] get
incorrect results [2] from, e.g., /sys/kernel/debug/gpio.
Enable the clock, so we get the right results!
[1] Sometimes, because many systems have 1 or mor interrupt requested on
each GPIO bank, so they always leave their clock on.
[2] Incorrect, meaning the register returns 0, and so we interpret that
as "input".
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
drivers/pinctrl/pinctrl-rockchip.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 49bf7dcb7ed8..f826793e972c 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1278,8 +1278,16 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
{
struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
u32 data;
+ int ret;
+ ret = clk_enable(bank->clk);
+ if (ret < 0) {
+ dev_err(bank->drvdata->dev,
+ "failed to enable clock for bank %s\n", bank->name);
+ return ret;
+ }
data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+ clk_disable(bank->clk);
return !(data & BIT(offset));
}
--
2.14.1