Hi, > > > I'd like to report that when upgrading our cluster from 4.14.18 to > > > 4.14.24-rc1 (with live guests migration), almost none of guests survived.. > > What's your hardware setup, intel with IBPB enabled microcode? > Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz > > therefore I suppose no IBPB (at least meltdown checker reports so) > > > > Does guests hang right after live migration? > yes, just tried it. > > > > > > Are you able to reproduce the problem, does it work with latest upstream? > yup, so I'm able to reproduce quickly. I'll revert the cluster to 4.14.18 now, > but setup test system just afterwards, so and test the patch you've proposed. > > > > > Not sure it helps, but following patch is missing in 4.14.24 > > > > commit 37b95951c58fdf08dc10afa9d02066ed9f176fb5 upstream. > > > > kvm_valid_sregs() should use X86_CR0_PG and X86_CR4_PAE to check bit > > status rather than X86_CR0_PG_BIT and X86_CR4_PAE_BIT. This patch is > > to fix it. > > > > Fixes: f29810335965a(KVM/x86: Check input paging mode when cs.l is set) > > Reported-by: Jeremi Piotrowski <jeremi.piotrowski@xxxxxxxxx> > > Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx> > > Cc: Radim Krčmář <rkrcmar@xxxxxxxxxx> > > Signed-off-by: Tianyu Lan <Tianyu.Lan@xxxxxxxxxxxxx> > > Signed-off-by: Radim Krčmář <rkrcmar@xxxxxxxxxx> > > I'll test and report. so indeed, this one on top of 4.14.24-rc1 fixes the migration for me. Greg, could you queue this one up please? Jack, thanks for the hint! BR nik > > n. > > > > > > Regards, > > Jack > > > > > > I noticed that most of them got stuck in "paused" state without > > > possibility to resume (virsh just reported guest cannot be continued and > > > needs to be rebooted). > > > > > > in dmesg, lots of following messages appeared: > > > > > > [ 116.593508] device vnet0 entered promiscuous mode > > > [ 124.143532] *** Guest State *** > > > [ 124.143594] CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 > > > [ 124.143668] CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 > > > [ 124.143871] CR3 = 0x00000000feffc000 > > > [ 124.143984] RSP = 0xffffffff82003e98 RIP = 0xffffffff816df002 > > > [ 124.144102] RFLAGS=0x00000246 DR7 = 0x0000000000000400 > > > [ 124.144221] Sysenter RSP=0000000000000000 CS:RIP=0000:0000000000000000 > > > [ 124.144341] CS: sel=0xf000, attr=0x0009b, limit=0x0000ffff, base=0x00000000ffff0000 > > > [ 124.144516] DS: sel=0x0000, attr=0x00093, limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.144692] SS: sel=0x0000, attr=0x00093, limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.144907] ES: sel=0x0000, attr=0x00093, limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.145089] FS: sel=0x0000, attr=0x00093, limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.145272] GS: sel=0x0000, attr=0x00093, limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.145447] GDTR: limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.145626] LDTR: sel=0x0000, attr=0x00082, limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.145814] IDTR: limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.145995] TR: sel=0x0000, attr=0x0008b, limit=0x0000ffff, base=0x0000000000000000 > > > [ 124.146173] EFER = 0x0000000000000000 PAT = 0x0007040600070406 > > > [ 124.146292] DebugCtl = 0x0000000000000000 DebugExceptions = 0x0000000000000000 > > > [ 124.146466] Interruptibility = 00000000 ActivityState = 00000000 > > > [ 124.146579] *** Host State *** > > > [ 124.146687] RIP = 0xffffffffa046a817 RSP = 0xffffc900200a7cb8 > > > [ 124.146832] CS=0010 SS=0018 DS=0000 ES=0000 FS=0000 GS=0000 TR=0040 > > > [ 124.146961] FSBase=00007fe82eff7700 GSBase=ffff881fffb40000 TRBase=fffffe00000df000 > > > [ 124.147144] GDTBase=fffffe00000dd000 IDTBase=fffffe0000000000 > > > [ 124.147262] CR0=0000000080050033 CR3=0000001f5b8fe004 CR4=00000000000626e0 > > > [ 124.147381] Sysenter RSP=fffffe00000de200 CS:RIP=0010:ffffffff81801f60 > > > [ 124.147499] EFER = 0x0000000000000d01 PAT = 0x0407050600070106 > > > [ 124.147614] *** Control State *** > > > [ 124.147734] PinBased=0000007f CPUBased=96a1e9fa SecondaryExec=000004f2 > > > [ 124.147849] EntryControls=0000d1ff ExitControls=002fefff > > > [ 124.147965] ExceptionBitmap=00060042 PFECmask=00000000 PFECmatch=00000000 > > > [ 124.148085] VMEntry: intr_info=80000081 errcode=00000000 ilen=00000000 > > > [ 124.148201] VMExit: intr_info=00000000 errcode=00000000 ilen=00000000 > > > [ 124.148318] reason=80000021 qualification=0000000000000000 > > > [ 124.148432] IDTVectoring: info=00000000 errcode=00000000 > > > [ 124.148545] TSC Offset = 0xffed7296fb06bc34 > > > [ 124.148655] TPR Threshold = 0x00 > > > [ 124.148770] EPT pointer = 0x0000001f1a0af01e > > > [ 124.148882] PLE Gap=00000080 Window=00001000 > > > [ 124.148995] Virtual processor ID = 0x0001 > > > > > > (never seen anything like that) > > > > > > I haven't yet went through all patches between those two versions, so don't > > > have any suspicion yet.. If anyone recognizes this as known problem, please > > > let me know.. > > > > > > I'm going to try whether I'm able to reproduce the problem. > > > > > > BR > > > > > > nik > > > > -- > ------------------------------------- > Ing. Nikola CIPRICH > LinuxBox.cz, s.r.o. > 28.rijna 168, 709 00 Ostrava > > tel.: +420 591 166 214 > fax: +420 596 621 273 > mobil: +420 777 093 799 > www.linuxbox.cz > > mobil servis: +420 737 238 656 > email servis: servis@xxxxxxxxxxx > ------------------------------------- > -- ------------------------------------- Ing. Nikola CIPRICH LinuxBox.cz, s.r.o. 28. rijna 168, 709 00 Ostrava tel.: +420 591 166 214 fax: +420 596 621 273 mobil: +420 777 093 799 www.linuxbox.cz mobil servis: +420 737 238 656 email servis: servis@xxxxxxxxxxx -------------------------------------
Attachment:
pgpTnD0VAbBwR.pgp
Description: PGP signature