Re: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 06, 2018 at 06:21:56PM +0000, Dexuan Cui wrote:
> 1. With the patch "x86/vector/msi: Switch to global reservation mode"
> (4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU
> Hyper-V VM with SR-IOV. This is because when we reach hv_compose_msi_msg()
> by request_irq()  -> request_threaded_irq() -> __setup_irq()->irq_startup()
>  -> __irq_startup() -> irq_domain_activate_irq() -> ... ->
> msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
> disabled in __setup_irq().
> 
> Fix this by polling the channel.
> 
> 2. If the host is ejecting the VF device before we reach
> hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
> forever, because at this time the host doesn't respond to the
> CREATE_INTERRUPT request. This issue also happens to old kernels like
> v4.14, v4.13, etc.

If you are fixing a problem you should report what commit you are fixing
with a Fixes: tag and add a CC: stable@xxxxxxxxxxxxxxx to the commit log
to send it to stable kernels to which it should be applied; mentioning
kernel versions in the commit log is useless and should be omitted.

Side note: you should not have stable@xxxxxxxxxxxxxxx in the email
addresses CC list you are sending the patches to (you mark patches for
stable by adding an appropriate CC tag in the commit log).

Here:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/stable-kernel-rules.rst?h=v4.16-rc4

Last but not least, most of the patches in this series do not justify
sending them to stable kernels at all so you should remove the
corresponding tag from the patches.

Thanks,
Lorenzo

> Fix this by polling the channel for the PCI_EJECT message and
> hpdev->state, and by checking the PCI vendor ID.
> 
> Note: actually the above issues also happen to a SMP VM, if
> "hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
> 
> Signed-off-by: Dexuan Cui <decui@xxxxxxxxxxxxx>
> Tested-by: Adrian Suhov <v-adsuho@xxxxxxxxxxxxx>
> Tested-by: Chris Valean <v-chvale@xxxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> Cc: Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>
> Cc: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
> Cc: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
> Cc: Jack Morgenstein <jackm@xxxxxxxxxxxx>
> ---
>  drivers/pci/host/pci-hyperv.c | 58 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 57 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
> index 265ba11e53e2..50cdefe3f6d3 100644
> --- a/drivers/pci/host/pci-hyperv.c
> +++ b/drivers/pci/host/pci-hyperv.c
> @@ -521,6 +521,8 @@ struct hv_pci_compl {
>  	s32 completion_status;
>  };
>  
> +static void hv_pci_onchannelcallback(void *context);
> +
>  /**
>   * hv_pci_generic_compl() - Invoked for a completion packet
>   * @context:		Set up by the sender of the packet.
> @@ -665,6 +667,31 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
>  	}
>  }
>  
> +static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev)
> +{
> +	u16 ret;
> +	unsigned long flags;
> +	void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET +
> +			     PCI_VENDOR_ID;
> +
> +	spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
> +
> +	/* Choose the function to be read. (See comment above) */
> +	writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
> +	/* Make sure the function was chosen before we start reading. */
> +	mb();
> +	/* Read from that function's config space. */
> +	ret = readw(addr);
> +	/*
> +	 * mb() is not required here, because the spin_unlock_irqrestore()
> +	 * is a barrier.
> +	 */
> +
> +	spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
> +
> +	return ret;
> +}
> +
>  /**
>   * _hv_pcifront_write_config() - Internal PCI config write
>   * @hpdev:	The PCI driver's representation of the device
> @@ -1107,8 +1134,37 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
>  	 * Since this function is called with IRQ locks held, can't
>  	 * do normal wait for completion; instead poll.
>  	 */
> -	while (!try_wait_for_completion(&comp.comp_pkt.host_event))
> +	while (!try_wait_for_completion(&comp.comp_pkt.host_event)) {
> +		/* 0xFFFF means an invalid PCI VENDOR ID. */
> +		if (hv_pcifront_get_vendor_id(hpdev) == 0xFFFF) {
> +			dev_err_once(&hbus->hdev->device,
> +				     "the device has gone\n");
> +			goto free_int_desc;
> +		}
> +
> +		/*
> +		 * When the higher level interrupt code calls us with
> +		 * interrupt disabled, we must poll the channel by calling
> +		 * the channel callback directly when channel->target_cpu is
> +		 * the current CPU. When the higher level interrupt code
> +		 * calls us with interrupt enabled, let's add the
> +		 * local_bh_disable()/enable() to avoid race.
> +		 */
> +		local_bh_disable();
> +
> +		if (hbus->hdev->channel->target_cpu == smp_processor_id())
> +			hv_pci_onchannelcallback(hbus);
> +
> +		local_bh_enable();
> +
> +		if (hpdev->state == hv_pcichild_ejecting) {
> +			dev_err_once(&hbus->hdev->device,
> +				     "the device is being ejected\n");
> +			goto free_int_desc;
> +		}
> +
>  		udelay(100);
> +	}
>  
>  	if (comp.comp_pkt.completion_status < 0) {
>  		dev_err(&hbus->hdev->device,
> -- 
> 2.7.4



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]