This is a note to let you know that I've just added the patch titled
ALSA: hda: Add a power_save blacklist
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
alsa-hda-add-a-power_save-blacklist.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 1ba8f9d308174e647b864c36209b4d7934d99888 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@xxxxxxxxxx>
Date: Thu, 22 Feb 2018 14:20:35 +0100
Subject: ALSA: hda: Add a power_save blacklist
From: Hans de Goede <hdegoede@xxxxxxxxxx>
commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream.
On some boards setting power_save to a non 0 value leads to clicking /
popping sounds when ever we enter/leave powersaving mode. Ideally we would
figure out how to avoid these sounds, but that is not always feasible.
This commit adds a blacklist for devices where powersaving is known to
cause problems and disables it on these devices.
Note I tried to put this blacklist in userspace first:
https://github.com/systemd/systemd/pull/8128
But the systemd maintainers rightfully pointed out that it would be
impossible to then later remove entries once we actually find a way to
make power-saving work on listed boards without issues. Having this list
in the kernel will allow removal of the blacklist entry in the same commit
which fixes the clicks / plops.
The blacklist only applies to the default power_save module-option value,
if a user explicitly sets the module-option then the blacklist is not
used.
[ added an ifdef CONFIG_PM for the build error -- tiwai]
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
sound/pci/hda/hda_intel.c | 38 ++++++++++++++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -179,7 +179,7 @@ static const struct kernel_param_ops par
};
#define param_check_xint param_check_int
-static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+static int power_save = -1;
module_param(power_save, xint, 0644);
MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
"(in second, 0 = disable).");
@@ -2055,6 +2055,24 @@ out_free:
return err;
}
+#ifdef CONFIG_PM
+/* On some boards setting power_save to a non 0 value leads to clicking /
+ * popping sounds when ever we enter/leave powersaving mode. Ideally we would
+ * figure out how to avoid these sounds, but that is not always feasible.
+ * So we keep a list of devices where we disable powersaving as its known
+ * to causes problems on these devices.
+ */
+static struct snd_pci_quirk power_save_blacklist[] = {
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+ SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0),
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+ SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */
+ SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0),
+ {}
+};
+#endif /* CONFIG_PM */
+
/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
[AZX_DRIVER_NVIDIA] = 8,
@@ -2067,6 +2085,7 @@ static int azx_probe_continue(struct azx
struct hdac_bus *bus = azx_bus(chip);
struct pci_dev *pci = chip->pci;
int dev = chip->dev_index;
+ int val;
int err;
hda->probe_continued = 1;
@@ -2142,7 +2161,22 @@ static int azx_probe_continue(struct azx
chip->running = 1;
azx_add_card_list(chip);
- snd_hda_set_power_save(&chip->bus, power_save * 1000);
+
+ val = power_save;
+#ifdef CONFIG_PM
+ if (val == -1) {
+ const struct snd_pci_quirk *q;
+
+ val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+ q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist);
+ if (q && val) {
+ dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n",
+ q->subvendor, q->subdevice);
+ val = 0;
+ }
+ }
+#endif /* CONFIG_PM */
+ snd_hda_set_power_save(&chip->bus, val * 1000);
if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo)
pm_runtime_put_noidle(&pci->dev);
Patches currently in stable-queue which might be from hdegoede@xxxxxxxxxx are
queue-4.4/alsa-hda-add-a-power_save-blacklist.patch