3.16.55-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Jon Hunter <jonathanh@xxxxxxxxxx>
commit 15d8374874ded0bec37ef27f8301a6d54032c0e5 upstream.
On the Tegra124 Nyan-Big chromebook the very first SPI message sent to
the EC is failing.
The Tegra SPI driver configures the SPI chip-selects to be active-high
by default (and always has for many years). The EC SPI requires an
active-low chip-select and so the Tegra chip-select is reconfigured to
be active-low when the EC SPI driver calls spi_setup(). The problem is
that if the first SPI message to the EC is sent too soon after
reconfiguring the SPI chip-select, it fails.
The EC SPI driver prevents back-to-back SPI messages being sent too
soon by keeping track of the time the last transfer was sent via the
variable 'last_transfer_ns'. To prevent the very first transfer being
sent too soon, initialise the 'last_transfer_ns' variable after calling
spi_setup() and before sending the first SPI message.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Acked-by: Benson Leung <bleung@xxxxxxxxxxxx>
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
[bwh: Backported to 3.16: use ktime_get_ts() and timespec_to_ns()]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -347,6 +347,7 @@ static int cros_ec_spi_probe(struct spi_
struct device *dev = &spi->dev;
struct cros_ec_device *ec_dev;
struct cros_ec_spi *ec_spi;
+ struct timespec ts;
int err;
spi->bits_per_word = 8;
@@ -379,6 +380,9 @@ static int cros_ec_spi_probe(struct spi_
ec_dev->din_size = EC_MSG_BYTES + EC_MSG_PREAMBLE_COUNT;
ec_dev->dout_size = EC_MSG_BYTES;
+ ktime_get_ts(&ts);
+ ec_spi->last_transfer_ns = timespec_to_ns(&ts);
+
err = cros_ec_register(ec_dev);
if (err) {
dev_err(dev, "cannot register EC\n");